Guys, unfortunately I've come to the decision to part with my car. It took me over 4 years to build this car and it was featured in zoom and street commodores. I just dont have the time for it anymore as lifes priorities have changed. Below is what Motor rb26/30 - cp piston and argo rods - Jun oil pump - ross harmonic balancer - JPC high volume sump - heavily ported head - tighe 274 intake and 278 exhaust cams with 11mm lift - performance valve springs - 1mm oversize ferrea valves - arp 0.5" head studs - main studs - oil restrictors in head and rear oil return from head. Motor makes over 450rwkw on 18psi 98 fuel. Car ran 10.04 @139 with full exhaust, cat and et streets. Was told it should run around 144mph with that power and it did feel like it didnt pull as hard after 6500rpm. Found a cooler clamp half off so wasnt making full boost. Still would have been making around 400-420rwkw to run that mph. $10,000 Everything else on the car is for sale apart from the simmons. Will get the rest up in the next couple of days. Attachment 53700 (http://www.calaisturbo.com.au/attachment.php?attachmentid=53700) Attachment 53701 (http://www.calaisturbo.com.au/attachment.php?attachmentid=53701) P7190117 - Copy.jpg (http://www.calaisturbo.com.au/attachment.php?attachmentid=53702&d=1336224200)

P7190097 - Copy.jpg (http://www.calaisturbo.com.au/attachment.php?attachmentid=53703&d=1336224361)

Hotside - Billet Mr Turbo S72-GTS (1000hp) - 6boost exctrctors, painted and wrapped - turbosmart powergate 60mm $3600 - cdi 500r $800 - A.R.E 600x300x109 cooler, polished piping, clamps and hoses $1100 - splitfire coilpacks $420 - Polished greddy plenum with Nissan infinity 90mm throttle body $850 - radiator, thermofans and polished radiator cover $330 Gearbox - Protrans 1000hp transbraked powerglide, TCE 3500 converter, B&M shifter custom mounted sold $3600 Vl turbo diff - Full spool, 31 spline moser axles, 3.7 gears, 0.5” studs and heavy duty rear girdle $1100 sold - Heavy duty one piece tailshaft to suit powerglide to vl diff - Supplied by JPC and cost $1160 $750 sold - Custom mild exhaust 4” dump pipe painted and wrapped. 3.5” the rest. High flow cat and 3.5” magnaflow muffler $1000 Fuel system - Custom polished 1.75l surge tank and twin 044 pump setup with polished 0.5” aluminium lines - Braided Teflon lines exiting the boot so there is no fuel smell in the car - Carter black lift pump - 0.5 inch fuel lines up and back - Splitter to braided lines in the bay - Blue fuel rail rb26 - Magnafuel reg $1250 Interior - Sparco evo 2 seats x2 $1100 - Autometer gauges boost, water temp and oil pressure $160 - Autometer cobalt monster tacho $200 - 4 point bolt in chromoly cage $750 - 5 point harness $80 - Interior including door cards and custom trimmed centre console (prostich), back seat and headrests, roof lining, light, dash, cluster, and pretty much everything else apart from the front seats $850 I don’t want to pull bits and pieces off the shell as id rather sell it complete. If anyone is interested in it and starting a project and want to save a fortune on paint and all the little Calais bits send me a pm or give me a call [phone removed] If you want any particular pics let me know and see what I can do

Bump

bump

so the shell is for sale too?

Shell is gone.

did you sell this diff yet? or is still up for sale?

It's sold mate

Cage still available?

Updated list of what is left. - cdi 500r $800 - A.R.E 600x300x109 cooler, polished piping, clamps, hoses and turbosmart blow off valve $1100 - radiator, thermofans and polished radiator cover $330 - 3.5� exhaust including 3.5" (high flow) cat and 3.5� magnaflow muffler $600 Fuel system - Custom polished 1.75l surge tank and twin 044 pump setup with polished 0.5� aluminium lines - Braided Teflon lines exiting the boot so there is no fuel smell in the car - Carter black lift pump - 0.5 inch fuel lines up and back - Splitter to braided lines in the bay - Magnafuel reg $900 Interior - Sparco evo 2 seats x2 $1100 - Autometer cobalt monster tacho $200 - 4 point bolt in chromoly cage $600 - 5 point harness $80 - Interior including door cards and custom trimmed centre console (prostich), back seat and headrests, roof lining, light, dash, cluster, and pretty much everything else apart from the front seats $850 [phone removed] If you want any particular pics let me know and see what I can do

One sparco seat and rail sold, one left.

Ecu?

Kris, what brand radiator is it and di you have all the over flow tanks lines etc etc thanks champ

Ecu is sold. Radiator is a standard vl turbo one. I had thermos on it and it was fine. Don't have any overflow lines and tanks. I just used a plastic bottle.

Updated list of what is left. - cdi 500r with wiring harness $800 ono - A.R.E 600x300x109 cooler, polished piping, clamps, hoses and turbosmart blow off valve $1000 - radiator, thermofans and polished radiator cover $330 - 3.5� exhaust including 3.5" (high flow) cat and 3.5� magnaflow muffler $550 - 4 point bolt in chromoly cage $500 - 5 point harness $80 - Interior including door cards and custom trimmed centre console (prostich), back seat and headrests, roof lining, light, dash, cluster, and pretty much everything else apart from the front seats $850 [phone removed] If you want any particular pics let me know and see what I can do

can you send me pics of the interior please. [phone removed]

hey mate set of boot carpet still got it?

Do you still have the manifold and gate? pm me we can work something out?

man thats a nice vl.. i can understand why youve stripped it but what a shame. tuf car man!