clean out of vl turbo bits -2 X standard R33 intercoolers $40 each -set of standard vl turbo injectors, rail n reg all working $180 -2 x AFM both working $30 -standard crank has never been used $50 -AVO low mount exhaust manifold 2 suit large turbo was fitted to a motor that was never run $350 -stage 2 crow cam never been run $150 -knock sensor $30 -VDO oil sender (for oil pressure gauge) $30 -Standard turbo intake manifold complete with Throttle body and Switch $150 -Oil Sump $15 -Red Rocker Cover $30 -Crank angle sensor complete with dizzy $40 -Air conditioner $40 -Auto Starter motor (reco'd) $60 -Water Pump $30 -Standard fan $15 -Aluminium intake pipe for turbo $30 -Standard torque convertor from turbo auto $50 -Crossmember from auto $30 -RB25det loom (if ne1 needs the plugs from this they're in perfect nik $30 -vl boot with boot release (white with blue pearl) $40 -standard polished turbo exhaust manifold heat shield $30 i have basically anything internall eg. valves, valve springs just ask and i might have it. All offers/trades are considered and welcome to come passed and have a look through what ive got.

ill grab the afm's and interested in turbo inatke thingy. whats the id where it goes onto the turbo please. pm me where your located and your number and whatever...

pm sent

Hey mate im definitly keen for that RB25DET Loom. Is this just an engine loom? what sort of condition is it in? is it complete? if its all good I will take it if your willing to send it to me, let me know how you want the money, I will pay postage. COD would probably be easiest for both of us. I live in Townsville, North Queensland. Cheers Edward EDIT: What sort of car is it out of? do you know if it will suit VCT?

pm sent

do u have a set of lifters for a vlt rb30. i'm after a good set without any ticking from them.

both afm's worked! thaks bud, feedback left. let me know about that other afm....

haytham, do u have the vlt or rb25 turbo oil inlet lines?

hey buddy can u find out how much to send the rocker cover to adelaide.post code is 5161 let me know how much may take it of your hands if postage isnt to much.cheers.

do you have the rubber intake pipe into the turbo?

thanks brett keep ya posted about the other AFM, sorry ali dont have oil lines, tweak i have an rb25det intake pipe its very similar to the rb30 pipe exept its 1 piece without the aluminium part if u want ur welcome 2 see it, tails ill get back to you on the lifters they're new its just a matter of checking that i have all of them ill let u know by sunday, sprigzy ill check with the post office today and let u know by sunday also

the avo manfoil got a picture does it fit the standard t03? will the lines need to be coustom ?

100 for inlet manifold?

got specs on the cam.( data & lamens terms. )

i have the spec sheet here but there'z **** loads on it CROW CAMS PART NO. 650 L/C 117 if ya want more info in pm just ask Quote: Originally Posted by vlhodge got specs on the cam.( data & lamens terms. )

exhaust manifold sold :) AFM'z sold

you still got the cam i want it

i bought the cam thanx

What mainifold has be sold the poished one or the avo

do you still have the turbo Exhaust manifold heat shield for sale?.