Just recorded a new PB yesterday @ A.I.R. Only had 4 runs, best of the day was an, 11.2 @ 121. My 60ft time was 1.65. Slowly getting there, changing a couple of things for next meet, so i'll have to wait til October 3rd to crack a 10, still using PUMP fuel too. Anyone go out there, was a major accident there, a rail car got outa control at the deep end of the track and rolled it several times.The driver was taken to hospital with reported burns to hands,arms and face.Hope he recovers well.Didn't see it myself as i was lining up to race, but seen the damaged car come back, not a pretty site. PSI_Adam

nice time ad. good to see hey does this auto have overdrive man? cause its killin me on the freeway Some original photos have not been recovered yet.

well done ads. Ill have to borrow the tyres again and give them there first 10 sec past!!!

Quote: Originally Posted by hipsi well done ads. Ill have to borrow the tyres again and give them there first 10 sec past!!! Hey Rob, hows things, workin hard are we?? I'm gonna try next meet to crack a 10, i think i will with this new cam that's going in very shortly.After that meet, they all yours mate, go for it.Then SA will have a VLT in the 10's, but hopefully i'll be there with you..BOTH on PUMP fuel and driven to and from the track, cant ask for much more than that!! Damn trailer cars, who needs'em!! DUZ-360,, yeah it had the overdrive when i had it, i never had it disabled. I'll get back to you tomorrow, i'll ring MV AUTO's for you, see whats going on mate.I'm about to go to work now, other wise i'd do it now for ya now.

nice time man, keep it up. Hope to see you crack the 10's soon. Does anyone know the fastest VLT in SA? Just wonderin...

thanks ad

Quote: Originally Posted by VLRB30ETT Does anyone know the fastest VLT in SA? I think the fastest (as in proven on the strip) would have to be Adams! Probably are some others out there sitting in people's sheds though heh. Nice work PSI! Some original photos have not been recovered yet.

well done buddy, not far away now!

Quote: Originally Posted by Jaytee well done buddy, not far away now! Cheers Jaytee, and all you others. As for the fastest VLT in SA, that goes to a guy named Dave Readon i think his name is.It did use NOS tho, but it ran 10.3 from memory.This was at least 5 yrs ago.I have heard from a mate at work that, the engine is going in a torana shortly, and should be out soon. I mates VLT is quicker than mine(HIPSI on these forums).Only ran it a couple of times, best was a 11.2 also, but at a huge 125mph on PUMP fuel too.I am carrying a bit more weight being a calais, but his is damn fast.Will run 10's easy, as soon as i lend him my tyres!!! We both want 10's on PUMP fuel, and both our cars are driven on the streets regularly. Later all PSI_adam

Congrats on the low 11 second pass, what mods are done to your car if you dont mind me asking, and at what psi did you run the 11.2? Doug

Hey Adam, Your right street meet not trailer meet! haven't run the car since the new trans has been fitted it's 100% better so 10's should be on the cards. Rob.

Quote: Originally Posted by hipsi Hey Adam, Your right street meet not trailer meet! haven't run the car since the new trans has been fitted it's 100% better so 10's should be on the cards. Rob. Hey Rob, hows things mate? I like that, trailer meet!! A sad thing is, we would only get 10 cars racing if the rule was " all competitors must drive the car in and home to race " At least we would get 50 runs each i suppose!! Mate, with that new trans, your looking at mid 10.5's, 10.8's at worst. Speak soon mate. DOUG, 23psi was used for that run.GT30bb turbo,custom high mount manifold, JPC 45mm ex/wstgate,custom plenum,big cooler,autronic smc,550cc injectors, SX fuel reg,044 pump,surge tank,wade 818b cam,blitz spec-r boost controller,trimatic, 3500rpm stall, LSD with 3.7's,venolia forgies,head has had the ports cleaned up,and manifolds match ported. I thinks that it!!

Do either of you guys have your cars engineered or do you just hope no one looks when you drive around? Some original photos have not been recovered yet.

Quote: Originally Posted by platinum Do either of you guys have your cars engineered or do you just hope no one looks when you drive around? UM, its still an RB30et SOHC, just with all the options ticked that Holdens missed out on from the factory.LOL Yes, they both would be defectable.Regency would have a field day!! They are both SLEEPERS really. PSI. Some original photos have not been recovered yet.

Did ya see the ground shakin white vn there? the berlina that ud think was stock till the key turned over

Quote: Originally Posted by MrChris Did ya see the ground shakin white vn there? the berlina that ud think was stock till the key turned over NO, cant say i did. What times did it run?? PSI.

Psi what colour is ya car? custom plates????

Quote: Originally Posted by VL_BT1 Psi what colour is ya car? custom plates???? My calais is white/silver with genuine 18" WH Grange wheels.No custom plates, although i would like too.It's just the unwanted attention that goes with them that i dont like. PSI.

hey PSI, i dont spoze u got any pics of your car as i wouldnt mind sum with the 18" grange mags, just wonderimg what mags to use on my up and coming project. My email is [email removed] Cheers Phil

Quote: Originally Posted by RB20DETVL hey PSI, i dont spoze u got any pics of your car as i wouldnt mind sum with the 18" grange mags, just wonderimg what mags to use on my up and coming project. My email is [email removed] Cheers Phil I have got some yeah. Will send a couple to you by the end of the end of the weekend. Cheers, PSI.