Is it tuned? Power figure?????

Quote: Originally Posted by grunter01 [View Post] Looking good, what the ceptors set you back About $210 including sandblasting and painted in 2pak. ---------- Post added 25-03-13 at 08:25 ---------- Quote: Originally Posted by vl4skids [View Post] Is it tuned? Power figure????? Hasnt been tuned yet.

Hopefully it cracks 220rwkw shaun!! Best of luck.

id say about 180kw at the flex plate

Quote: Originally Posted by PROGMH [View Post] Hopefully it cracks 220rwkw shaun!! Best of luck. I'd say more like 101.9 hp at the flywheel on 30psi.... hahaha ---------- Post added 26-03-13 at 09:15 ---------- 15x8's all painted up. Some original photos have not been recovered yet.

Where did you buy the cepters from

Sorry to ask another question regarding the diff but, are you still running disk brakes and standard suspension? I'll be buying wheels soon then getting the diff done and I'd like to get the same size and offset wheels as you have but I want to retain disk brakes and standard suspension to keep costs down. Cheers

Quote: Originally Posted by Wkd_Vl [View Post] Where did you buy the cepters from AJAX Wheels Moorabbin. You can't just walk in and buy them. You have to work out what rear offset you want, take in to old interceptors and they cut the centre out and weld them to whatever width rim you want. Sizes are 3.5" - 8" wide. ---------- Post added 27-03-13 at 09:06 ---------- Quote: Originally Posted by TUXEDO [View Post] Sorry to ask another question regarding the diff but, are you still running disk brakes and standard suspension? I'll be buying wheels soon then getting the diff done and I'd like to get the same size and offset wheels as you have but I want to retain disk brakes and standard suspension to keep costs down. Cheers if you shorten the diff as much as mine you cant run disc rear. Im now running a shute at the track so that didnt bother me. As for suspension, Its still standard but you will have to make a small mod to the lower control arms. You have to cut the outter rolled edge off the lower arm and then get the arm boxed, as cutting that rolled edge off the arm it loses its strength. See pic below, you will see the outter rolled edge missing and a laser cut gusset welded in for strength, under the gussets there is 4 to 5mm plates also welded to the inside. See STIX in "For sale advertised" thread for the laser cut gussets. Hope this helps. ---------- Post added 27-03-13 at 09:17 ---------- Wheels fitted to car 15x8 rims with BF Goodrich 245/60/15 Radials! Will have some better pics soon. Some original photos have not been recovered yet.

Surely you can fit a much larger tyre than 245/60?

Quote: Originally Posted by PROGMH [View Post] Surely you can fit a much larger tyre than 245/60? Yeah I can fit a 26x10 or a 255x60 but the rolling diameter of a 255 is 27" and it sits to high. plus it comes down the the cost of the tyres! As Im tipping the first set wont last long on the car!! lol Transbrake and a **** load of power = Fun!!!! lol

Wheels need center caps!!!

Not when you have billet axles and long studs!

I have billet axles, long studs and centre caps with 6 inches of dish;-) cars looking good mate, very keen to see how it goes

need side Venetians

Should put hub caps on it...

Quote: Originally Posted by cava454 [View Post] Wheels need center caps!!! Ive got centre caps. I just didnt put them on before that photo. ---------- Post added 28-03-13 at 08:57 ---------- Quote: Originally Posted by Althoats [View Post] need side Venetians I had horizontal side venetions but when I got the car back from being stolen it was missing 2 things. My side venetions and the fire extinguisher! Why I have no idea! I haven�t found another set to replace them yet.

I understand first hand how much time and f****** around it is getting particular things exactly the way you want it.... full credit it to you man. Can say by far one of the cleanest White SL's around and has been for a long while. Just a question about your eBOOST2..... Ill be purchasing one off stix soon and was wondering if the loom can be extended, ran under the carpet and mounted in the secondary compartment of the centre console?

Quote: Originally Posted by GM.0870 [View Post] I understand first hand how much time and f****** around it is getting particular things exactly the way you want it.... full credit it to you man. Can say by far one of the cleanest White SL's around and has been for a long while. Just a question about your eBOOST2..... Ill be purchasing one off stix soon and was wondering if the loom can be extended, ran under the carpet and mounted in the secondary compartment of the centre console? Cheers. I seen your build thread mate, yours is coming along nicely. In regards to the EB2, the wires can be extended as its just a bare loom that comes out of the EB2 and out of the electronic solenoid, so you can make it how ever long you need it.

Cheers man, just hanging to drive it Some original photos have not been recovered yet.

News update!!! Turn key will be tomorrow!!! First time in a year and a half!!! talk about being excited!!!