text me prices i cant refuse

pm sent, cheers

I need to clear my study up.. I have crap everywhere so random fittings from my desk sale. Russell VE Braided Brake Lines - Suit Omega, SV6, SS & SSV. Should also fit Redline models with the Brembo. These are ADR ok and will pass any engineering inspection. $150 Contact details in my sig. AN-6 Check Valve $20 AN-6 40 Micron Filter $20 LS Based Coil - 1 of $20 (From memory it is LS2, came from a crate motor I did some mock up on) Aeromotive AN-10/AN-6 Multi Port Fuel Log. CNC'd. Perfect for multi carby, nos etc etc. Brand new, cheapest in the world $80 AN-4 90 Deg Black Hose Ends 5 of - $20ea AN-4 180 Deg Hose End $25 1/8" NPT to AN-4 - $4ea AN-6 Flare Cap - $5 AN-6 Black Flare Cap - $5ea 2 of AN-6 Coupler Black - $8 3/8" NPT to AN-6 Black - $5 1/2" NPT to AN-8 Black - $6 AN-8 Coupler Black - $10 AN-6 Black Hose End - $10 AN-6 Coupler - $8 1/2" Pipe to AN-8 Male Flare - $15 AN-6 180 Deg Hose End - $30 1/2" Pipe to Female AN-8 $15 - AN-8 Male Flare Union $6 - AN-8 Coupler $10 AN-6 to AN-8 Expander - $6 LS1 EFI Adapters $10ea AN-8 Barry Grant Demon Fuel Log - $80 AN-8 ORB 90's (Dry Sump Fittings) These are super bloody expensive, $30ea Random used hose - $ AN-4 90 Deg, AN-4 Straight, 1/8" NPT to AN-4 and 500mm of Hose $30 AN-8 Hose End + 500mm of hose fitted off $25 AN-10 Hose End + 500mm of hose fitted off $35 Russell Speed Bleeders - $10 a pack - 7 of Check Valve AN-6 Suitable for anything up to 1500psi etc $30ea 3 of Some original photos have not been recovered yet.

Edlebrock AN-6 Filter 40 Microns $30 ea Push On Check Valves - Billet 1/8" -$5ea 1/4"-$7 3/8"-$12 and 1/2"$15 Turbo Gear Box adapters to AN-6 and AN-8 (T350 T400 T700 etc) $10 and $12ea D585 Truck Coils - Set of 8. These are the best LS coil you can get. Roughly 30% more spark energy. $250 for the set. 10" AN-3 teflon brake lines $10 ea Some original photos have not been recovered yet.

Guys I've also got a bucketload of Teflon based hose going cheap. :)

what are the speed bleeders to suit?

M10 x 1.0 So most PBR Calipers. I've never actually put them in stock brakes now I come to think of it. I'm 99% certain they would fit though. I know they fit Harrops, PBR's and AP's (So should fit some Brembos as well being AP is a subsidiary).

thanks for the hose and fittings mate, ur a legend!

Not a problem :-)

Any -12 Teflon?

Doesn't really exist yet, most of the better known companies only make up to AN-10.

Yeah it's a big size! It's for a fuel line from the tank to my filter/pump and need -12 and I'm running ethanol Everything else is braided Teflon so I wanted to keep it the same but might not b able to

You are going to struggle, your best bet is hardline in 3/4".. I've used it on my car and you can get the tube nut and sleeves. Ariel is using it inside my fuel tank to feed my two Aeromotive Pro Series Pumps..

Specials time.. Rubber Braided Hose AN-12 Rubber Braided Hose - $25 p/m AN-10 Rubber Braided Hose - $20 p/m AN-8 Rubber Braided Hose - $20 p/m AN-6 Rubber Braided Hose - $25 p/m Teflon Braided AN-3 Teflon Braided Hose - $15 p/m AN-6 Teflon Braided Hose - $20 p/m AN-8 Teflon Braided Hose - $25 p/m AN-10 Teflon Braided Hose - $25 p/m I have fittings to suit and will do them at wholesale prices. I can fit off hose ends for $5 per end. I can make up turbo oil/water kits custom including if you tell me lengths If you buy in bulk I can do cheaper. Contact via [email removed]

https://www.facebook.com/MissilePerformance007 Get on it, most of the clearance specials will be listed on there from now on.

Have you got some sort of equivalent to a speedflow 140-04? An-4 male to an-4 female with 1/8 npt port in the side?

Hey got any adapters that go from -10 hose end to power steering side hose barb. Think it's 5/8. Preferably in 90deg

Nup, Thanks Luke@Missile

pm sent :)

Ive deleted it Luke and I will report it to a full mod too 88 Chaser ---------- Post added 23-08-13 at 21:35 ---------- Thanks mate.