Nar nemo.
650cc injectors
Stock (new) VL in-tank pump
2.5L surge tank
1x Pier burg external 350LPH pump (alcohol friendly)
Sard fuel reg
Injectors are pretty much maxed out on pump.
But neno is yet to drive it on the st, thursday will tell the story.
Troy, you re-tuned yours yet???? if so you should come cruising with us this week???
Whitey
650cc should handle a fair bit more than 480rwhp
With a manual it should b able to make near 600hp with those injectors
Not sure with an rb but the rule with a 2jz is what cc your injectors are is roughly what rwhp u can make on pump
Mine should b redone this week
New eboost is in
Trd diff is in
Going to do a couple pulls at 35lb n see what happens
That boost will see 900+
Will street it on about 25-27 which will be about 700-750
Radials go on this week 2
Can't cruise yet, still not regoed
Have driven it with a trade plate a couple times tho
Goes pretty well
Breaks traction in 3rd at about 120-130 pretty easy
Some original photos have not been recovered yet.
Yeah it should make it, got a fair bit we can do n should get it on sooner
I've got radials so it will hook up pretty well, will just hav to wait n c at what power they won't
Hope to hav a roady all sorted this week
About 900 on a us dyno is needed to trap 150mph with a 6spd so that's prob around 800 odd on our dynos
noway would I load up 900hp at the track with my bottomend
If it was a built bottomend n I had a solid tailshaft I'd do it
A genuine 900hp would prob go 153-155mph with the 6spd if u launch it really well
Pete just tuned a STD 2j the other day that went 698hp
No tyres hold it but it's in a Silvia I think
Mine gets run up thurs night after work
With some luck I could also hav it regoed by the weekend
You're gunna regret chasing numbers when it ****s its load on the dyno bro instead of taking it out for a good drive/race now while it's still together...
Some original photos have not been recovered yet.
Quote:
Originally Posted by TroyVK
[View Post]
Going to do a couple pulls at 35lb n see what happens
That boost will see 900+
Will street it on about 25-27 which will be about 700-750
Man I'm no 2J expert, But I think you need to ring Scott OKE020 with the 2J corolla as his thing made 928atw on like 43-45PSI with a massive 88mm wheel billet turbo on it,
Mine n scotts setups r a bit different
His an auto for 1
Shane with his Cressida went over 1000hp n that was on a 74-76mm turbo
My current tune would prob run 135-140mph
But it needs some fine tuning n new eboost is in so we going to try n get it on sooner
662.5@23 on 1st run shows what sort of potential there is with it
N at that power there's not a hint of blowby
Looks lik Pigsy done a pretty damn good job building it
Was that a little RED S14 silvia do you know Troy???
Makes good numbers but isn't fast on the st, just lets the tyres go and starts get going at like 140kph.
Like what Ollie said mate, start to enjoy it, leave it for now, drive it then find more HP.
Either way its making good power now I recon. But that me.
Quote:
Originally Posted by TroyVK
[View Post]
Mine n scotts setups r a bit different
His an auto for 1
Shane with his Cressida went over 1000hp n that was on a 74-76mm turbo
My current tune would prob run 135-140mph
But it needs some fine tuning n new eboost is in so we going to try n get it on sooner
662.5@23 on 1st run shows what sort of potential there is with it
N at that power there's not a hint of blowby
Looks lik Pigsy done a pretty damn good job building it
so being an auto it's gonna take 10psi more to make the power? lol
Dyno racing is the best!
Not sure what colour, that's all pete told me yesterday
If it had tyres that could hold it it would b damn quick
Im going to have the same problem
We haven't really spent much time on the car tuning it
There's still timing to go plus it was spinning the tyres at 23lb because they where ready to pop
Should be interesting what happens thurs night
---------- Post added 15-02-11 at 13:05 ----------
Quote:
Originally Posted by Epitaph
[View Post]
so being an auto it's gonna take 10psi more to make the power? lol
Dyno racing is the best!
Your an idiot
At that boost with that turbo, if the head was fully done (which it's not) n the bottomend fully built which I'm pretty sure it's not, it should be making well over 1100hp
Scotts now getting a head all done for it n I think he has also gone billet mains ect in the block
It should now make what it's supposed to, not that it needs anymore power