Quote: Originally Posted by ANK [View Post] i have got a few people moded adjustable ones from maatouk who where using other companys and they have since had no issue billet and modded ones where being used before going over to the maatouk ones English do you speak it? So your saying you know a few people who had billet and modded ones from other companies but had failures and as such are now using maatouks rockers without issue?

thanks for all the PM/phone call's guys got a lot to think about, just need to work out what to do now, trust me every type of rocker out there someone has had a issue with but it could also be the cam/spring/valve combo causing the issues also theres more to the story i think???????????? Some original photos have not been recovered yet.

Quote: Originally Posted by Duke57TT [View Post] English do you speak it? So your saying you know a few people who had billet and modded ones from other companies but had failures and as such are now using maatouks rockers without issue? yeah thats right and before some golly wog has a crack maatouk's are not EXACTLY the same as others i didnt want to mention names of others cause petros might cry

Thank you for your kind consideration Ank, I was wrong about you. What a top bloke you are !

Quote: Originally Posted by EVLRB30 [View Post] thanks for all the PM/phone call's guys got a lot to think about, just need to work out what to do now, trust me every type of rocker out there someone has had a issue with but it could also be the cam/spring/valve combo causing the issues also theres more to the story i think???????????? What seat pressure do you run, as when i went through my exhaust valve saga the seat pressure i was quoted to use with the setup, my mate(who built my motor) thought where way over the top and would smash everything in the valvetrain to pieces i was quoted 200lb, we settled on 150lb he though the 3 main points to cause damage on the jpc rollers would be: 1.excessive spring pressure 2.incorrect sweep or contact point at the valve tip 3. excessive tappet clearance thoughts.....? cheers darren Some original photos have not been recovered yet.

well i think mine are too soft after speaking to a few people mine are 105 on the seat and 305 on the nose at .550" and my lash is .016 too soft i think

Quote: Originally Posted by EVLRB30 [View Post] well i think mine are too soft after speaking to a few people mine are 105 on the seat and 305 on the nose at .550" and my lash is .016 too soft i think yep i woudn't run that even with a Tx2, i know jakes motor and the ones my mate have built with tx2's run 110 on th seat for a guide. cheers darren

Quote: Originally Posted by Jet R31 [View Post] yep i woudn't run that even with a Tx2, i know jakes motor and the ones my mate have built with tx2's run 110 on th seat for a guide. cheers darren yep thats what i thought way way too soft......

i know im opening an old thread here but who else makes roller rockers for rb30's?

ive got jpc's latest havnt had a issue hardly backed off at all when i checked them after calder, they seem the goods

Quote: Originally Posted by EVLRB30 [View Post] ive got jpc's latest havnt had a issue hardly backed off at all when i checked them after calder, they seem the goods there the same but they have bigger adjusters which was the problem they had

yes thats right its a push rod type adjuster that has a ball with a flat that sits in the cup, it works very well, def much stronger than the old adjusters pigsy did u end up looking into a full roller set up?

Quote: Originally Posted by EVLRB30 [View Post] yes thats right its a push rod type adjuster that has a ball with a flat that sits in the cup, it works very well, def much stronger than the old adjusters pigsy did u end up looking into a full roller set up? yer finally did ordered the adjusters just the other day got sick of waiting for faber so l will start on them next week have some one else interested in making them once they are done

will you be looking to get multiple sets made to sell to people? or just a one of set?

Quote: Originally Posted by cookie747 [View Post] will you be looking to get multiple sets made to sell to people? or just a one of set? who me ,the company that will be making them will get multipul set made cheaper and stronger than any other that will hit the market one set would be unpractical