THE HOLDEN COMMODORE FORUM

HOLDCOM Community

Built around the cars. Kept alive by the people.

Technical help

Shifter under standard console (B&M)

Started by GMH-JC vbmenu_register("postmenu_2241397", true); · 28 July 2009 · 51 replies

Preserved from CalaisTurbo (partial recovery). Original authors and dates are shown; archived members are not current Holdcom accounts.

GMH-JC vbmenu_register("postmenu_2255909", true);Archived member

12-08-09, 20:50 GMT+10#21

Down to last 3 Got your payment Luke, will send tomorrow.

0 likes

sleepyvlt vbmenu_register("postmenu_2255921", true);Archived member

12-08-09, 20:58 GMT+10#22

Quote: Originally Posted by GMH-JC Down to last 3 Got your payment Luke, will send tomorrow. cheers Mate

0 likes

GMH-JC vbmenu_register("postmenu_2256284", true);Archived member

13-08-09, 10:17 GMT+10#23

2 left

0 likes

trbo3ltr vbmenu_register("postmenu_2256822", true);Archived member

13-08-09, 19:28 GMT+10#24

i got mine, cheers jerome. they suit very well. easy to apply to any vl snap these up guys.. Carl Some original photos have not been recovered yet.

0 likes

kalais6 vbmenu_register("postmenu_2257300", true);Archived member

14-08-09, 10:38 GMT+10#25

Yeah I'll definately take one thanks. PM me with your details and whatever else u need to know

0 likes

GMH-JC vbmenu_register("postmenu_2257403", true);Archived member

14-08-09, 12:34 GMT+10#26

Sent Details, Cheers, JC.

0 likes

GMH-JC vbmenu_register("postmenu_2259276", true);Archived member

16-08-09, 21:21 GMT+10#27

Ok im all out for the moment. If i can generate some more interest I will make another 10. Please let me know via PM if you would like a shifter box. Cheers, JC

0 likes

pnishu vbmenu_register("postmenu_2262730", true);Archived member

20-08-09, 17:04 GMT+10#28

Quote: Originally Posted by GMH-JC Ok I have read in a few posts of people wanting a shifter box to fit your shifter under the standard console. I was thinking of making a technical article about it, but i dont have all the info of pulling the standard one out. So... I have pulled mine out, taken measurements, and made 2 for another member of the forum. This is the result. ( refer to pics ) So i guess what im trying to get at, is if anyone wants help doing this please PM me and i can make the boxes for $60 each. Im sure there will be many questions, so fire away, and if anyone else has any info to add please do. gday i have a vh commodore with a b&m megashifter i know there slighty diff to vls but would they fit just askin no stress if not i have another plan but if you could let me know would be sick THANKS (PNISHU)

0 likes

GMH-JC vbmenu_register("postmenu_2264668", true);Archived member

23-08-09, 11:29 GMT+10#29

Quote: Originally Posted by pnishu gday i have a vh commodore with a b&m megashifter i know there slighty diff to vls but would they fit just askin no stress if not i have another plan but if you could let me know would be sick THANKS (PNISHU) Yeah apparently they will fit. I found out through HoBi (Daniel), as i made one for his vk and it just requires a bit of extra length to the box itself. Not a problem for me to make. Cheers, JC. Some original photos have not been recovered yet.

0 likes

GMH-JC vbmenu_register("postmenu_2267523", true);Archived member

25-08-09, 21:41 GMT+10#30

Will fit VB-VS. Can also make them to fit R31 and any other car you have. Have 3 on standby if any one wants one.

0 likes

kalais6 vbmenu_register("postmenu_2267742", true);Archived member

26-08-09, 10:32 GMT+10#31

Is mine on its way mate?

0 likes

GMH-JC vbmenu_register("postmenu_2267768", true);Archived member

26-08-09, 11:22 GMT+10#32

Yeah mate sent it to you.

0 likes

kalais6 vbmenu_register("postmenu_2267914", true);Archived member

26-08-09, 14:03 GMT+10#33

Quote: Originally Posted by GMH-JC Yeah mate sent it to you. Any idea when ? Havent seen it thats all - might just have to keep an eye out

0 likes

GMH-JC vbmenu_register("postmenu_2267915", true);Archived member

26-08-09, 14:06 GMT+10#34

You should recieve it today

0 likes

pht35e vbmenu_register("postmenu_2269937", true);Archived member

28-08-09, 16:20 GMT+10#35

yewww got mine today will leave trader feed back mate just a question with your diagram im guessing cut the edges off the box and curve them like your pic so it fits the standard hole for the shifter?

0 likes

GMH-JC vbmenu_register("postmenu_2269966", true);Archived member

28-08-09, 16:48 GMT+10#36

Yeah you can drill a hole or cut the tab out. I just cut the tab out to allow plenty of space for the cable bracket.

0 likes

BT130T vbmenu_register("postmenu_2270108", true);Archived member

28-08-09, 19:30 GMT+10#37

u still got any left mate?

0 likes

GMH-JC vbmenu_register("postmenu_2273364", true);Archived member

01-09-09, 19:12 GMT+10#38

All out for the moment. Will make some more based on enquiry.

0 likes

Blink vbmenu_register("postmenu_2279219", true);Archived member

09-09-09, 10:17 GMT+10#39

Just ordered one, Legend mate.

0 likes

deano86 vbmenu_register("postmenu_2282235", true);Archived member

13-09-09, 09:36 GMT+10#40

hey mate i want to fit a mega shifter into a vh with a turbo 700, would that be any different? looks exactly how i want it to! also do u have to change the linkage the connects to the gear box at all?

0 likes

Sign in or create an account to reply. New members are welcome—no purchase or old CT account needed.

Shifter under standard console (B&M)

Who’s online