I'm digging the plenum looks good but get a new washer bottle haha

just get that catch can sitting straight lol... dont blame for picking somthing out, it just gives u another reason to work onit lol looking wicked tho, loving that plenum

yeah am ging to het it stright when i get a bracket welded on the side of i,dont worry its annoying me too haha,cheers,i should get matt to bring me 1 back from oz

a few pics of my new rims car really needs a tidy up.but run out of muny for now so it will have to wait also made 260rwkw on 14 psi but will get better tune early next year as its a prety average tune lol and mably a bit more boost

ok update time, -Have brought some new Wilwood Superlite 4 pot Calipers for the VL and Dba019 slotted rotors,am getting custon brake lines made and am on the lookout for a 1 inch master -have ordered new washer bottle -have also ordered new tail lights -door has been fixed and repainted -have found a bootlid garnish in better condition -centre caps fitted on mags car ran 13.3 at 171km down the 1/4,will be getting some et streets to get the time down

well done mate, car looks to have came a long way from the first post, keep up the good work

any updates there Danny boi ?

un not really mike,works come to a bit of a halt!!!but brakes are on as you know!!!depending on work the rust should be getting done the week after next.and the door getting fixed properly,not sure if im going to bring it to powercruise,really wanted to get some et streets b4 i go,but will see what happens!!!the vl will probly go on the back burner for a while!!!!have to get serious about getting some cash together for a house or section to be honest,as boring as that sounds!!!!!

Bumpedy bump!

i bumped this over a year ago so im gonna do it again... bump

bump for the people

Yea I see he has a turbonetics on it now and msybe a new head?

Dammm Last post on here was about 4 years ago haha, oh while im here I may as well do an update. New items to be installed are: T64 Turbonetics turbo, T4 housing, Billet Compressor wheel Hi mount Manifold Under Car Surge Tank Bosch 044 AEM Water/Methanol Injection Kit Stainless I/C Piping CNC ported Cylinder Head 1mm oversize Intake & Exhaust Valves Stainless Ferera Valves HD Crow Cams double Valve Springs Thige 272 Cam ARP Stud Kit Cometic Head Gasket Thinks that's all, 370kw on 15psi, did a 12.6 at 116mph the other day, keen to go back and try and better the time but before I did I will change the Gear set in the diff to 3.9 as im hard on 3rd gear limiter going over the line, and its a bit laggy through the gears. also will get the launch control set up so I gan get boost off the line and maybe start in 2nd gear with the 3.9s, and some decent slicks, using some 17" slicks at the moment, will get some 15" steelied widened and get some new et streets. Cheers hope you enjoy Some original photos have not been recovered yet.