Universal Braided line kit for all GT28 GT30 GT35 series turbos. $250 delivered (depending on if you want more or less of the braided hoses but...)
Kit comes with :
Metric adapters for water lines on turbo
Two 90 degree -6AN anodised fittings for water lines
2.5 meters of -6AN braided stainless steel hose for water lines
-3AN 90 degree fitting for oil feed
-3AN oil feed fitting on turbo
40cm of -3AN teflon inner stainless steel braided line for oil feed
Alloy oil drain and gasket
40cm of -10 braided stainless steel line for oil drain
what you will need to adapt to your specific vehicle :
-fittings that screw into your block (different for all vehicles, so not included in the kit, can source them if need be [but only if you know what thread they are])
-hose ends for end of the braided lines if need be. (some applications you will need hose ends for the end of the braided line [i.e. the oil feed], but in some cases you can just use a hose clamp onto a barb [i.e. water])
355 Holden Stroker Kit
Contains :
Eagle crank
Scat 4340 Rods
Forged Pistons and rings
9 keyway rollmaster double row timing chain set
full gasket set
powerbond balancer
main and rod bearings
JP high volume oil pump
Only $2299!
All high quality components, everything needed for a full bottom end rebuild.
sent you a pm dude
ta
OK, after sitting down and going through it all, i now have a 100% complete GT35R braided line fitting kit available for the RB30.
Kit contains every line, hose end, fitting and adapter required to fit a GT35, GT35/40, GT30, GT30/40 turbo to an RB30.
Complete kit price is $350 inc delivery.
Remember, this is a complete kit for an rb30, no chasing hard to find adapters for the block like other 'kits' and is a 100% braided line kit, no cheap rubber hoses used at all.
pm for more details....
Wastegate sale!!
Tial 44mm Wastegates Retail @ over $800 normally, so get in while stocks last!!! price in the next few days
38mm and 60mm also available.
More July Specials
Bosch 044 pump + billet bracket - $299 DELIVERED!
Microtech Lt10/lt12 - pm for $$$$$
TiAl 44mm wastegates - $550 (retail $799) DELIVERED! << this price wont last!!
1000cfm quad throttle body - $699, comes with bonus tps and IAC.
seimens injectors 600/750/870 - $$$$$$ bargin, pm for price!
16" curved blade 2500cfm thermo fan - $89, add $10 for chrome version
Big holley carby sale!! - pm for best price
NEW PRODUCT RELEASE
SFI Apporved RB30 Race 25% UNDERDRIVEN balancer. Underdriving all the accessories attached to the engine means they sap less power. less power driving the accessories means more power left for the rear wheels!
this all steel sfi approved balancer
unlike the romac one, it comes with the power steering pulley attached as one unit, so this is a 100% all new all steel race balancer. *note* you will have to replace all belts with shorter items.
$279.95 in stock, and ready to go :)
photos will be up later on comparing it to the size of the oem one (romac)
what can u do me then..... i'm doin a budget conversiom meself but all i need is oil lines and manifold.... recon u could rattle of a few prices for me.... cheers
Billet fuel rails in blue red or now CHROME!!
here is a picture of a s4/5 rx7 13BT rail i just picked up.
have these for rb30, rb25, rb26, s4/5 13BT rx7, sr20det.
The chrome ones look absolutely awesome.
RED/BLUE RB30 - $220
CHROME RB30 - $230
in stock!!
Clearance item
1x GT35R turbo, brand new, 1.06 rear, never opened out of box - $1599
no longer required for build, customer has stepped up to t04z. must go!
