Quote:
Originally Posted by NZ EVLHSV
The rocker cover looks good now... massive difference!
Love that dash too
Yeah pretty stoaked with the out come took a couple of goes that red wrinkle isn't as easy as it looks to spray out of a can !
Quote:
Originally Posted by UNONT2
so shes off the road now mike?looking good mike keep it up
Sort of haha still running into town to get "parts" and sort out some of the work that people will be carring out on her
Some original photos have not been recovered yet.
My last attempt was better I put the rocker cover in the oven on a low heat to warm it up that worked real good
Some original photos have not been recovered yet.
Wrinkle is easy if you heat it up. I put mine on my bbq after painting it and it wrinkled mad. Just use ALOT of coats. The thicker the paint the more it wrinkles
Quote:
Originally Posted by UNONT2
so you got it hot before you painted it
Not hot I'd say warm to touch
Quote:
Originally Posted by pmac
Wrinkle is easy if you heat it up. I put mine on my bbq after painting it and it wrinkled mad. Just use ALOT of coats. The thicker the paint the more it wrinkles
I did the heat gun trick on my first one it wrinkled mad aswell
Update - I'm all moved into my new job and house. The house has a good double garage all lined so I can chuck the heater on and work on the wagon have taken the front bumper off and will replace the front upper bumper strip as its broken have also steam cleaned the interior which came up real good. So the next step or plan for the next couple of nights will be to relocate the battery to the rear and move the power steering bottle
Alarm now installed with a remote boot popper and all locks have been disabled will get around to shave the door locks and areil oneday also Got my hands on a Gktech cooler kit but not to sure which way to go keep the cooler hidden or have a little show beneath the front still deciding on that one
Quote:
Originally Posted by UNONT2
put up pics mike when you move the power steering bottle.im not sure where to put mine
Yeah thing is I got snowed under with calving and now running out of time with Powercruise just around the corner had it all set up to do but had to put it all back together so the alarm guy could do his thing still going to do it though
Some original photos have not been recovered yet.
yeah should come for a visit check it out
I've got a 600x300x76 cooler aswell same as yours I think Danny what do I need to do to make it fit the piping ?
Brother and I spent last night and this morning putting the cooler on went ok could of gone better pretty tight fit but we got there went with the hidden gktech cooler for now
Haha yeah if I get time I'll put the bigger cooler on, I was actually going to put the bigger one on but we just went ahead and fitted the gktech one up be easy to change it over I hope
Some original photos have not been recovered yet.