Quote: Originally Posted by Loves A dose ok let me clarify the T70 will be installed then the car will be driven to the workshop to have the injctors, pump, fuel reg, n microtech installed. then i want to know what rpm the turbo will start boosting with all those mods thx shouldnt be a problem with that now mate if you are serious about goin ahead with ur mods.. ill go speak to a few peformance shops. becuz all motor and tunes will tell you different spooln times.

mate if you want to run a T70 on a stock car... is the car even factory turbo..

ok 4 da last tym car is factory turbo, it's stock but after the turbo will be fitted it will get some 440cc injectors, 044 pump, fuel reg, microtech lts8 etc etc!!! it will get that straight after the installation of the turbo EQUIPD it would be greatly appreciated if u could speak 2 sum pfrmance shps thx mate

if i was you mate iwould put all the other stuff on first like fuel pump and so on and then put the mass turbo on just to be safe it would more then likey run like a dog

ok car is not going to be driven anymore!!!!!!!!!!!! turbo n all accessories are going to be put on @ the mechanics so no need for tow etc its all getting done in one hit thx!!!!

what the hell is everyone talking about that the exhaust housing is massive? its a .82 !!!!!! that thing will start spooling from about 2600. I have a 1.06 and that hits hard at 2900rpm.

they are talking about this . the monsta dude assured me it was definately a 82 on the monsta turbo but when put against a gt35 1.06 you will see that the .82 is substantially larger than the gt35. http://calaisturbo.com.au/showthread.php?t=70485

dude are you looking at the front or the back the 1.06 is the rear. and according to this pic here you can see that the 1.06 is much bigger -

yes the t70 does have a 82 rear. u r right petros so when will that start to come on boost? 3" Inlet Diameter 2" outlet Wet Floating Bearings 1/8 NPT oil inlet T3 Flange : Fits T3 and T3/T4 Manifolds Front Cover A/R .7 Front wheel trim 64.5mm Rear Cover A/R .82 t3 flange Rear wheel trim 60.5mm

i was referring to the 5th pic down. i thought it meant how big that bit was. so it is actually at the back . that puts my mind at ease as i thought i wouldnt get much boost because i have all the crap sitting at home. im looking to make full boost by atleast 4500 max. the dude said to me it would reach fullboost on the 3 litre around 4000-4500. thanks for clearing that up petros. would the pic i mentioned 5th down , would that bit make much difference.

so does anyone know approx when the t70 with 82. rear will start to boost and when it will hit full boost? ?????????????????????????????

??? plz need help asap

Check the first page again, Im pretty sure somone gave you are fair estimate Some original photos have not been recovered yet.

start boosting - between 3000rpm and 4000rpm noone will be able to give u much better accuracy than that.

ok thanks if anyone has one of these on their vl turbos it would b great if u could assist with further info on this turbo and when it boosts fanxxxx!

if u searched this site properly u would see about 5 usernames running this turbo.