NICE looking car danha!! :)

could you add a BOV mount to the piping some where for extra $$$$$

Quote: Originally Posted by Pariah082 could you add a BOV mount to the piping some where for extra $$$$$ Unfortunately we don't do fabrication work in house, thus the kits are all the same and are very cheap. Any exhaust shop could do this for you for a few dollars. cheers, Greg

Just wondering if you can still use the standard air idle hose (throttle bypass hose) or do you need to get/cut a custom one? It seems that the outlet off the pipe is a bit further away from the throttle compared to standard.

Quote: Originally Posted by PipeBom Just wondering if you can still use the standard air idle hose (throttle bypass hose) or do you need to get/cut a custom one? It seems that the outlet off the pipe is a bit further away from the throttle compared to standard. This has since been rectified and there's now no need to get any extra length of hose. It's probably best to change the hose anyway as most of the VL's I've seen are cracked (or very close too) from old age. cheers, Greg

any chance of getting the hose clamps used in the hybrid kits included in these kits, even at an extra price? these ones look a little iffy...

Quote: Originally Posted by vlthunter any chance of getting the hose clamps used in the hybrid kits included in these kits, even at an extra price? these ones look a little iffy... We can include any clamps you like (obviously at a cost) I can assure you that the clamps that are included are GREAT!! :) (I'm using them on my own car) Greg

im not sure as i havent read it anywhgere but is this kit suitabelf ro an rb20 are there any changes neeeded to fit it to the rb20 engine>??? as i know it is designed for rb30 but will it fit the 20

i was goin to p.m u bout this but i thought it might get asked a few times. just wanted to no if it is possible to supply pipping pre cut to relocate the AFM? cheers

i think gktech is goin to make a kit for that in the future

Quote: Originally Posted by b00ST!!! im not sure as i havent read it anywhgere but is this kit suitabelf ro an rb20 are there any changes neeeded to fit it to the rb20 engine>??? as i know it is designed for rb30 but will it fit the 20 I believe the fitment will be very close. Even if it were to be modified it would still work out to be a cheap option. Quote: Originally Posted by mitch_m45 i was goin to p.m u bout this but i thought it might get asked a few times. just wanted to no if it is possible to supply pipping pre cut to relocate the AFM? cheers We will be making a kit up in the coming months for the AFM to sit in the intercooler piping as well as a replacement pipe from the turbo to where the AFM would usually sit. This should make some *dose* noise. At this stage we're really just concentrating on getting these kits completed and here :) cheers, Greg

Hey Greg, just a quicky. How far does the cooler sit below the bumper? if there is any overhang at all that is. Cheers

very instrusted Can u pm me when u have the kits so i can fix u up with $ so u can send it straight up.....

Quote: Originally Posted by Phillthy Hey Greg, just a quicky. How far does the cooler sit below the bumper? if there is any overhang at all that is. Cheers The intercooler sits flush with the bumper as seen in this picture: Quote: Originally Posted by rusty577 very instrusted Can u pm me when u have the kits so i can fix u up with $ so u can send it straight up..... The price will not be the same when the kits arrive. When the actual kits are here the price will be $599 + freight (they're on sale for pre-buy purchases at only $499 at the moment) cheers, Greg

wats the longest point including end tanks? i asked this in the other thread but i cant find it no more

Quote: Originally Posted by MaZzA wats the longest point including end tanks? i asked this in the other thread but i cant find it no more The intercooler is 895mm's in length.

this kit looks clean and when i get the rb in im thinkn of gettn it but can you do a same kit but with a diff cooler so it is the same width but taller?i want it to poke out from underneath the front lip

Quote: Originally Posted by b00ST!!! this kit looks clean and when i get the rb in im thinkn of gettn it but can you do a same kit but with a diff cooler so it is the same width but taller?i want it to poke out from underneath the front lip Hi mate, unfortunately it's not something that we can do as the intercoolers are made in lots of 50+ at a time. You could get the end tanks of one of the usual intercooelrs that we sell (600x300x76mm) modified to suit. Greg

cant wait to get my kit :D have you tried or driven a car with one of these kits greg, or has anyone for that matter? why are smiles off??

Quote: Originally Posted by vlthunter cant wait to get my kit :D have you tried or driven a car with one of these kits greg, or has anyone for that matter? why are smiles off?? We've just fitted the kit this afternoon to *YEP_boost*'s car. He will have the kit on his car until the kits arrive. If anyone in Victoria wants to see the kit in person I'm sure Steve will be more than happy to show you his engine bay. Pictures should be up tomorrow or late tonight. cheers, Greg -------------------------------------------- EDIT: New pictures of the new trial car. Some original photos have not been recovered yet.