THE HOLDEN COMMODORE FORUM
HOLDCOM Community
Built around the cars. Kept alive by the people.
Sponsored by HOLDCOM AUTO PARTS ↗
+ Start a discussion
VL Commodore
my 300kw vl nitron
Started by vltnitron · 12 Nov 2005 · 127 repliesPreserved from CalaisTurbo (partial recovery). Original authors and dates are shown; archived members are not current Holdcom accounts.
11-01-06, 16:29 GMT+10#22
yeah was a good price mates rates.
the motor is still the same as a new one but old.
I still carn't belive the motor is holding up and i've been belting the arse off it too.
335kw is 450hp. which would go close to 600hp at motor
0 likes
11-01-06, 16:47 GMT+10#23
so bout 450ish at the treads on bout 20psi nice nice
Some original photos have not been recovered yet.
0 likes
11-01-06, 16:48 GMT+10#24
how is ur gbox and clutch holding up?
can u notice a big diff with the msd - i got 1 but dunno if it will make a difference!
0 likes
11-01-06, 21:03 GMT+10#25
yeah 20-21psi boost.
Clutch started to slip when i had a full car load in 3rd gear racing.
So on my own it's fine.
Don't know if the msd made a difference as i did turbo, planum, injectors and msd at the same time. i would imagine it would have boosted up the spark a fair bit as it really cains, when i was checking for spark once. can still feel it now
0 likes
16-01-06, 14:46 GMT+10#26
yeah ok,
adams car when it run 11.2 his 660ft times were 7.2 also and i got 50kw more power than his did at that stage, so will see on the 4th of feb.
So are you coming out for a race on the 4 th BT
0 likes
16-01-06, 14:49 GMT+10#27
Quote:
Originally Posted by vltnitron
yeah was a good price mates rates.
the motor is still the same as a new one but old.
I still carn't belive the motor is holding up and i've been belting the arse off it too.
335kw is 450hp. which would go close to 600hp at motor
have u done a compression test. would be interesting to see the results after so much punishment and power thrown at it
0 likes
16-01-06, 15:31 GMT+10#28
[quote=vltnitron]yeah ok,
i said 11.6 to be conservative.
as your car is a man now that is my opinoin now is that not allowed ?
0 likes
16-01-06, 21:37 GMT+10#29
what eva get ova it.
i was talking about when adam had the gt 30 and was making 280kw.
and if you could gain 90kw from a manual i think every one would have one.
and when tilbrook dyno centre changed there 31 skyline wagon from auto to manual they only gained 18kw.
And i will be going for a 10.99-11.2 now as i know how it hooks up. Because i was dumping it a 5,000rpm and wasn't spinning.
Good day
0 likes
16-01-06, 22:33 GMT+10#30
so BT r u a 1/4 mile expert?????????????? Wat will mine run??
So hav u got a 044 pump, big injectors, exh manifold to suit the 35/40, cam??
also auto to manual will only give u up 2 max 40kw diff, depending on wat stall u run aswell....
also bt wat did u say in another thread (personally i dont think any off them will do a 10) and u go on talking bout respect!!
enough said on that note the track will tell!!!
lets not spoil this thread
its a damn nice car and very quick
p.m if u wana say anything bt
0 likes
16-01-06, 22:39 GMT+10#32
yes alex it has mate
Some original photos have not been recovered yet.
0 likes
16-01-06, 22:49 GMT+10#33
now this is a forum and voiceing my opinion is that not allowed ?
now i hope he does run a good time as per my previous statement i was just saying 11.6 as a guess at wat he would run now if u guys wat to go get all girly and start crying about it thats your problem but this is a forum and i was giving my opinion and a guess at wat he would run .
0 likes
17-01-06, 09:59 GMT+10#35
330rwkw in an auto would be good for a low 10...
so in a manual id say high 10, very low 11 if all put down right
0 likes
26-02-06, 20:38 GMT+10#36
pumped a bit more boost in to it at a show on weekend and turned out 349.5kw on 23psi and still isn't pinging on pulp fuel yet.
Just waiting for the stock bottom and head to go bang
0 likes
02-03-06, 17:54 GMT+10#38
Quote:
Originally Posted by vltnitron
pumped a bit more boost in to it at a show on weekend and turned out 349.5kw on 23psi and still isn't pinging on pulp fuel yet.
Just waiting for the stock bottom and head to go bang
wont be long
go more another few wont hurt
Some original photos have not been recovered yet.
0 likes
18-03-06, 21:20 GMT+10#39
nice work!!!
mine still hasnt been built...copping a lotta goods tho...
Yeah get some Momo stars on it..i got a set of them on mine, best improvement ive done
0 likes
04-04-06, 09:52 GMT+10#40
i have been on the look out for them rims but don't want to pay too much for them, how much they usually go for? have you got a pic of yours with the rims on
0 likes
Sign in or create an account to reply. New members are welcome—no purchase or old CT account needed.
Who’s online
0 members and 0 guests active in the last 15 minutes
No signed-in members active right now. Guests are welcome to browse.
Visitors Today20
33,602 threads, 484,230 posts and 24,897 images saved from CalaisTurbo.
As at . Recovery is continuing.