Just chuck some door pods with front components in the front doors..

Quote: Originally Posted by 4sakenvl Just chuck some door pods with front components in the front doors.. Yeah I have a set of VR/VS door pods, I started prepping one way back when I got them and havn't touched them since I figure I may aswell make use of the speaker space in the dash though. As for the rear speakers I thought of something to replace the bashed up original woodboard trim today, havn't looked too far into it but hopefully it'll work (and look alright). Some original photos have not been recovered yet.

I chucked my tweeters in place of the original 4 inchers. Just bent up some brackets, and made sure they were pointing in the right directions. Too easy.

Quote: Originally Posted by NZ_GTS I chucked my tweeters in place of the original 4 inchers. Just bent up some brackets, and made sure they were pointing in the right directions. Too easy. I suppose I might wait then.. I have so many things that need sanding that I just can't be bothered starting! (everything from the bumper trim down, the whole way round the car (with the calais skirt pieces), for one..)

yeah they are ok.........subarus just make a hideous noise....like all 4 cylinder cars!!!!

Quote: Originally Posted by NZ_GTS I chucked my tweeters in place of the original 4 inchers. Just bent up some brackets, and made sure they were pointing in the right directions. Too easy. yip your onto it,thts what ive done aswell,tweeters in place of the 4" ones and 300w Alpine 6 1/2 components in the door pods,works really well!! was having a play on net and found this and much more VL turbo,BT1 stuff,BOBO very channel 1 for you and your BT1http://www.oztion.com.au/buy/auction.aspx?itemid=4356406&d=0&sort=0&pg=1&cat=21 4&view=List&f1=0&f2=0&type2=&type3=&type4=&type5=& s=&pcode=&dis=0&freepost=

NZ BT1 i fully gta agree with ya ae. gudman!!! specially wif their pistons goin the wrong way haha ;p

Quote: Originally Posted by SIKUTE yip your onto it,thts what ive done aswell,tweeters in place of the 4" ones and 300w Alpine 6 1/2 components in the door pods,works really well!! was having a play on net and found this and much more VL turbo,BT1 stuff,BOBO very channel 1 for you and your BT1http://www.oztion.com.au/buy/auction.aspx?itemid=4356406&d=0&sort=0&pg=1&cat=21 4&view=List&f1=0&f2=0&type2=&type3=&type4=&type5=& s=&pcode=&dis=0&freepost= Trying to see that website and it's not workin'. Looks like I need to get back to work on my doorpods.. and I've just seen Mike is looking for some, I don't think I had to search for too long to find them, and they cost me $50 or $60, which I thought was ok. Haha this has given me another idea.. a shortcut, same shortcut as my bootlining idea, when I get around to testing it I'll take some pics. Mike, you were selling some doorpods a while ago weren't you??

Quote: Originally Posted by VAYK8 NZ BT1 i fully gta agree with ya ae. gudman!!! specially wif their pistons goin the wrong way haha ;p aaaaaiiiiii lol!!!!!!! Some original photos have not been recovered yet.

It works if you delete the bt1 off the front of it very nice polished rocker cover http://www.oztion.com.au/buy/auction...=0&pg=1&cat=21 (http://www.oztion.com.au/buy/auction.aspx?itemid=4356406&d=0&sort=0&pg=1&cat=21) 4&view=List&f1=0&f2=0&type2=&type3=&type4=&type5=& s=&pcode=&dis=0&freepost= Yeah I sold those they weren't going to work in the wagon so I'm going to modify some VR/VS door pods

Did they just look wierd or somethin'? Haha, yeah mate, that rocker cover will fit straight onto a walky motor.. no problem!

Just didn't go with what I'm cooking up for the interior

Quote: Originally Posted by S1KVL Just didn't go with what I'm cooking up for the interior Nearly tempted to send you mine just so I can see what you do I've bought so many bits of the years that I havn't gotten around to using yet.. but I have no thoughts of gettin rid of it all. Some original photos have not been recovered yet.

I'll fill ya in when you come down to paintball

Quote: Originally Posted by S1KVL I'll fill ya in when you come down to paintball Yeah I'm lookin forward to actually getting to have a look at a few of the cars more than we could at the brock cruise. Just sucks that I probably can't get my tints done by then I thought I had all the bits, but I don't. Some original photos have not been recovered yet.

Huh are you attempting to do the tints yourself ?

dont even bother doing your own tints..its real hard!! and you end up with big bubbles and the repco tints go all purple looks gay as

^what he said! A curved back window is a cnut; the pros do it in strips (joins on the demister lines) and careful use of a heat gun. Professional tinting film is metallised - the stuff from Ripco isn't which is why its cheap, and why it fades. Some tint places give you a ten year guarantee against peeling and bubbling. I've had two cars done by car tint. Top job.

Lol nah I'm not doing it myself, have a deposit down at tintacar from big boys toys last year.. (it's been that long) but I can't have it done until my new tailgate is on, which is all painted but I need the bits listed in my sig otherwise I have to take it all out of the tailgate on there and transfer it over in one day (while my car sits in the drive all opened up) and I need the parts anyway (cause the tailgate on there is going onto another car) I've found a motor though, but nothing else I think I need a rear rust breeder too actually.. Some original photos have not been recovered yet.

Yeah mine were done by Hyper with a lifetime warranty they did a top job