Very nice! I eventually want something custom made up to suit my reverse pattern shifter..

Quote: Originally Posted by Steve [View Post] Very nice! I eventually want something custom made up to suit my reverse pattern shifter.. That's something I'll be doing once the wiring is done and the interior goes back together Some original photos have not been recovered yet.

Well sh!t, that look's bloody awesome!! Ive always liked the little SL dash badge too

started making up a bracket for the Coulsen seats today. Drivers side pretty much done. Will have to do passenger side at a later stage as I need to start getting it ready for wiring. Some original photos have not been recovered yet.

Seats trimmed. That's pretty much the only update I have. Hoping to have it running around New Years, however wiring is still being done and that's out of my hands. Some original photos have not been recovered yet.

Some more progress, this time with wiring. Body loom is pretty much done with a new custom fuse box, the sparky has moved on to making the engine loom. Some original photos have not been recovered yet.

that dash is epic...well done be good to see how much it makes with the 6466, such a tuff street turbo cheers darren

Love the cluster and seats man!

Cheers guys! Pretty damn keen to get it going now, it's been far too long since it's been on the road...

Whilst waiting on the sparky to finish off the loom, I assembled the seats and trial fitted the drivers seat to make sure it was all good with the new rails etc. Quite chuffed with the seats, very comfortable. Some original photos have not been recovered yet.

Got some more work done yesterday. Got my last two hoses for the oil cooler sorted, so that's now all done. Also fitted some knock sensors off a Falcon. Sparky was there finishing off the last bits and pieces, we fitted the ECU and and powered up the dash etc. Not long now before we can turn the key, just need a set of leads and some coolant and we should be good to go I hope. Once it is running and we know there aren't any issues with the harness it'll come out again and get braided before final installation. Some original photos have not been recovered yet.

Well, the car is running, great success, no rods out, no fuel leaks, no electrical fires. Feels incredibly good hearing it running again after such a long time, and we had relatively small issues getting it running as well, one plug needed to be re-pinned, and my PWR radiator "which takes a standard radiator cap" leaks around the radiator cap, seems the reach is a tad off. Very keen to see how it goes once it is finished Huge thanks to Mitch at WA Performance and Jase for doing the wiring! Some original photos have not been recovered yet.

that Bresciani plenum!!

It's been a hectic month, that's for sure. Car went back on the dyno a few days after it was started, it didn't quite perform as we wanted and didn't respond well to boost what so ever, it just seemed choked up. Head came off and was sent away and got machined to take 1mm oversize valves, and I ordered a new TX2 cam from Crow along with valve springs to suit. Slapped engine back together with some new gaskets etc. and fired it up. It picked up an additional 30 rwhp on gate pressure with the new cam and valve combo compared to before, and seemed a fair bit happier. The Engine has now done just over 500kms, and last night I took it down to the drags to see how she was going, with 19psi of boost, I managed an 11.38 @ 121mph with a 1.80 60�, so not great driving from my part, but very happy either way, haven't driven the car in ages, and it is a new PB for myself and the car. Will be putting some more kms on it and make sure everything is sweet before we start pushing more boost in it, so just time to enjoy and get some seat time now I believe =)

Went out and snapped a few quick photo's. It has now done about 700kms since build, and seems to be working alright, touch wood =) The photos are, much like my driving, far from pro. Either way, here are some of them. Some original photos have not been recovered yet.

Looking good Hampy, those seats are perfect

Time for that yearly update I guess. Decided to make some changes, so engine and box came out. Converter was sent away and tightened up a smidge along with a service. Now drives a lot nicer on the street, but it does take a bit longer to get on boost down the drags. Also went a bigger rear housing, went from a 0.84 to a 1.00, and whilst I had that ceramic coating, I had an EGT bung welded on the manifold and had that re coated too. Ordered a trigger kit, bottom part from Hi Octane to suit an RB26, and top part from Ross Racing to suit the SOHC RB30. Reason for going the Hi Octane bottom kit was that I wanted to maintain my current balancer and oil pump setup, so this was the cheaper way of doing it. Turned out though that the Hi Octane kit didn't actually work with the Ross balancer either way, so had to replace that with an ATI balancer and pump drive which brought the price up to about the same sort of coin as the Ross bottom kit either way, so lesson learnt there. Dizzy was removed, and a core plug was slapped in place. Tank was emptied, E85 was poured in, and the car was retuned. Less timing and less boost made 421 rwhp on a hubber, couldn't go past that unfortunately as I was running out of fuel pump, seems as a single 044 didn't love life. I took it down to the drags to give it a test, and it went 11.1@123mph, so a new PB for me and the car which was nice. Next on the cards will be a bigger fuel system with a drop tank, twin internal pumps, new lines, new injectors and a retune. Some original photos have not been recovered yet.

nice car mate! if you sell that BRESCANI plenum , let me know first! Some original photos have not been recovered yet.

Have just ordered myself a TorqueLine diff centre, couldn't find too many reviews online, so keen to see what they're like. Can't be any worse than a 32 year old LSD.

The diff centre rolled up late last week, dropped it off to Final Drive along with the rear axle. Got it all back Yesterday with the centre fitted and new seals and bearings. Kinda keen to get it back in and see the difference, they did note that the original centre and bearings were looking pretty tired, so no real surprises there. ---------- Post added 04-05-18 at 06:22 ---------- Some original photos have not been recovered yet.