Ok guys 15% off to the next 5 customers.. I will also have Banjo bolts to suit RB30's water and oil feed points in the block and return bungs to AN-10 within the next week. ---------- Post added 12-07-10 at 17:59 ---------- Breather Line Kits on special :) All kits include 2m of Missile Performance Braided Hose and 2 x RedHorse 90 deg and 2 x RedHorse Straight Fittings. An extra metre(or more) is available on request at a discounted rate ;) AN-12 Red/Blue Breather Kit x 1 $220 + postage AN-12 Black Breather Kit x 1 $235 + postage AN-10 Red/Blue Breather Kit x 1 $190 + postage AN-10 Black Breather Kit x 1 $200 + postage AN-8 Red/Blue Breather Kit x 1 $165 + postage AN-8 Black Breather Kit x 1 $175 + postage

http://www.youtube.com/watch?v=aDSozy6MZto Watch this video, this is another way to go about cutting the hose. I havent tried it personally, all i usually use is the thinnest cutting disc i can find, masking tape and it cuts through like a hot knife through butter. then put a few drips of oil in the fitting just to help it go in.

his "Clean" cut isnt so clean..

AN-10 Breather kit is sold. It is going to be used on a LS1 setup. Should have photos soon. Just to mention all the random fittings are sold.

Good to see you doing good luke-

Thanks Nick ;)

Turbo Feed + Return Fittings in Stock! Oil Feed bolt + banjo to AN-3 including crush washers $25 + postage Water Feed bolt + banjo to AN-6 including crush washers $40 + postage Oil Return to AN-10 $15 + postage Just some random shots ---------- Post added 31-07-10 at 16:48 ---------- I also have some LS1, LS2, LS3, LS7, L98, L76 Oil Plugs - You will need one if you order a new block. $30 + postage ---------- Post added 31-07-10 at 16:57 ---------- Pre manufactured Teflon Hose (Oil Feeds & Competition Only Brake Lines) From 250mm to 1500mm in length Comes with straight/straight straight/90deg teflon crimp fittings at each end Starting at $25 for the 250mm straight/straight version. Please PM or email for prices Some original photos have not been recovered yet.

We can supply all you LS based engine needs. I work in close partnership with NJC LSX Performance who is the Victorian dealer for Performance Inductions Heads and Intakes. From Cathedral to Canted head and intake setups- ls1,ls2,ls3,ls7,C5R,Canted,etc Heaps of options from 4 bolt to 6 bolt heads, From as cast intakes to cnc 2 piece intakes with 4500 flanges- Jesel to T & D rockers- Rocker covers Camshafts Springs You name it and Nick @ NJC can do it. You want a full house 440ci LSX small block, or a basic 427ci Nick can provide it. Please email [email removed] for info on pricing :) Some original photos have not been recovered yet.

is anybody else turned on by these pics ? ive read through your thread and i look forward to ordering some stuff off you soon mate good work :)

We like fast things here at Missile ;) The faster the better...

Hey mate, Im after 1m of -4 braided line, How much all toghter posted to Melbourne. Thanks Ev

PM Sent

Some new stock items :) AN-8 (1/2") and AN-10 (5/8") Aluminium Hardline. the AN-6 (3/8") Will be in stock end of week. $10 per/m for the AN-6 and $12.50 per/m for the AN-8 and AN-10. This stuff looks awesome polished up and will escape any inspection by the police. The hardline to braided hose adapters are about $25 a pop. Can also go to femal ends so you can just put a 3/8th NPT fitting to AN-6/AN-8/AN-10 male fitting straight out of your fuel rail, turbo drain etc etc. It is cheaper than braided hose but is more time consuming to put in. IF you put the effort in and polish it and bend it up nice in my opinion it probably looks better. Enjoy Some original photos have not been recovered yet.

We also do wholesale pricing for businesses. Please contact via email. Thanks Luke@Missile

hey luke if my braid eats a fat one with the ethanol going through it i'll be hitting you up for 1/2" alli tube with braid ends so you know

Yeah once you get the bending down pat to make it neat it looks as good as factory. Some people paint it black and do it sneaky. Combine it wil black fittings and it looks factory. 1/2" line is roughly equiv to AN-8 so it will handle plenty of HP. The 5/8" stuff is good for turbo drains/fuel lines/breathers etc and is equiv to AN-10.

whats it like to bend?

Easy peasy.. even CT members could do it. :) I use a pipe tool to make the bends perfect but you don't need to. You can also use conduit springs to keep it more round if you need to make lots of bends in a small space. The only issue with Aluminium Hardline is it must be firmly attached the the vehicle. Can't be allowed to vibrate against stuff etc. From a prettiness point of view it will lose its luster if you polish it but you can clear coat it, bar where the fitting/olive is used. I generally paint it black for sleeper spec.

Seeing as Forza is having a 1 week only Hektic garage sale, I thought I better do the same. 3.5m of AN-6 Single Wrap Braided Hose $50 + postage 2.2m of AN-10 Single Wrap Braided Hose $50 + postage 1.36m of AN-8 Single Wrap Braided Hose $15 + postage 2.9m of AN-6 Double Wrap Braided Hose $60 + postage (1 section 1cm long does have some small imperfections. Won't affect hose, but its not as pretty) 2m of AN-8 Double Wrap Braided Hose $50 + postage This week and this week only.. You want a few sizes, I will make it cheaper again and combine postage. These prices won't be repeated.

pm sent. will take these: 3.2m of AN-8 Single Wrap Braided Hose $50 + postage 3.0m of AN-10 Single Wrap Braided Hose $70 + postage