Back to shop ↗
THE HOLDEN COMMODORE FORUM

HOLDCOM Community

Built around the cars. Kept alive by the people.

+ Start a discussion
Holden Commodores gathered at Holdcom
Forum Home›CalaisTurbo archive
CalaisTurbo archive

SICKVL rajab built vl turbo for sale

Started by sickvl80 · 9 Nov 2005 · 74 replies

Preserved from CalaisTurbo (partial recovery). Original authors and dates are shown; archived members are not current Holdcom accounts. View original archive ↗

sickvl80Archived member
and a couple more................ engine bay underneath Some original photos have not been recovered yet.
0 likes
sickvl80Archived member
yeah thanks. if someone has the cash ill sell, if not ill keep it. it is getting the rest of the stuff finished on it by al so all it needs is the motec plugged in and tuned. they r going to put one of there computers in it cos i am paying for them to rewire the car with a motec loom and then they'll give it a base tune so all the new owner (if there is one) has to do is buy the actual computer and get it tuned. i don't wanna sell but this thing has cost me so much, including a relationship so i may move on, who knows. Some original photos have not been recovered yet.
0 likes
sickvl80Archived member
sorry i dont know whats happened with the photos. the car is for sale without the wheels or plates for $17,500 o.n.o it has no rego no rwc and it needs: loom and computer tailshaft cooler piping exhaust everything else is done ready to go it would cost about $4,500 to finish it if u went a motec cheaper if u go with a cheaper computer. $22,000 for a car that will do tens and look damn good doing it is worth the cash i reckon, cheers, John.
0 likes
sickvl80Archived member
ime and my missus split up and it wasn't amicable she got us into debt with mortgage arrears and stuff so i need cash. i might keep it if i can sell my wheels and the turbo set-up, cheers, John.
0 likes
sickvl80Archived member
car is no longer for sale. drivetrain is for sale pm for details, turbo setup is gone selling the motor complete never started for $6000 with rajab plenum has all the good gear very strong motor. ps: im gonna put my stroker motor in this car im over turbos hence the sale
0 likes
sickvl80Archived member
i was running nos it was a 150hp wet system plumbed in just in front of throttle body i never used it, i will on my next turbo though, John.
0 likes
sickvl80Archived member
hey all, the turbo will be for sale in april. it has a differant engine now as i sold my old 1 specs r: cp pistons shotpeened rods arp rod bolts head port and polish stage 1 cam new water pump balanced & blueprinted its not as good as my last 1 mainly cos the head isn't worked as much and a smaller cam but has the basics there to go to the next level. it also has: polished jd plenum s/s top mount manifold turbosmart gate garrett gt35 turbosmart type 3 bov front mount cooler the trans is a jatco with stage 2 shift shift upgraded bands and needle bearings in place of plastic ones it will have a 3000rpm stall. it will be controled by a microtec computer, still has 750cc injectors, huge fuel system including cell, carter, surge tank, edelbrock pump and reg custom rail etc. 1 piece tailshaft, 3.9 diff, pro-ratchet shifter (keas adaptor trans brake button is now power button) 100hp wet nos system, 3" exhaust, custom dump. it is still a tuff car just not the 9sec animal i was building. it just needs a trimatic or glide, bigger cam and rods to be a low 10 high 9 second car. i am selling as all my mates r selling theirs, i am prob gonna lose my licence for a while and i wanna spend some money on my house. im in no hurry to sell it will come fully tuned with at least 250rwkw, it will be at easternatsas a final farewell before it sells as i want to attend at least 1 car show with it before she goes. the interior is as it was, fully custom race seats, 15 autometer gauges etc. externally it has had the stickers removed, will have a new uncut front bar and a fresh cut & polish so it will gleam. the engine bay no longer has the green in it it is all either silver or polished, has osk strut tops brake and radiator cap, polished plenum, polished comp cover, block is gloss black all new parts used new hoses belts etc. no longer has 20s it has 15x4 and 15x8 chaserswith front runners and slicks but i may put some 18s on it when i sell. will be available in april so those loking for a new ride keep it in mind. i am in no hurry to sell, no tyre kickers, no time wasters and if u don't like the price please dont post in my thread, John. $17,500 firm.
0 likes
sickvl80Archived member
will sell now if the right offer comes along needs, exhaust, cooler pipes, dump pipe, tailshaft and a computer or will sell as a rolling shell without fuel system, motor, box make an offer, cheers, John.
0 likes
VKingArchived member
Do you have an email address I can contact you at? Vry interested
0 likes
sickvl80Archived member
email is [email removed] and ill have some photo's up of how it sits at the moment later today, cheers, John.
0 likes
aus880Archived member
CAN EVERYONE PLS STOP POSTING CRAP IN THIS THREAD THIS GUYS TRYING TO SELL NOT GET INTO DISCUSSIONS IF YOU ARE INTERESTED YOU HAVE HIS CONTACT DETAILS USE THEM INSTEAD OF POSTING " VERY INTERESTED" ETC AND NEVER FOLLOWING THROUGH
0 likes
sickvl80Archived member
here some up-dated photos people: engine bay: fuel system: gate: side no stickers: front: dash: this hasn't changed but i just like showing it off its still the same car interior wise, new engine and engine bay detailing, fuel system is hooked up, has no stickers on the side of the car, otherwise its as it was, enjoy, John. Some original photos have not been recovered yet.
0 likes
sickvl80Archived member
will have more pics in the readers ride section, cheers, John.
0 likes
sickvl80Archived member
aus880 just cleaned the thread up for me cos it had alot of crap in it but feel free to post genuine enquiries or comments, John.
0 likes
sickvl80Archived member
price is negotiable depending on how u want the car, ie: roller, no gauges, standard fuel system etc. John.
0 likes
sickvl80Archived member
$13,500 will sell the car right now as it sits with a garrett to4b on it. to get it running it will need: ecu tailshaft cooler piping dump pipe exhaust tune probably $3500 if u go with a microtec the car is rolling on chasers, need to sell over cars they just get me in trouble as i just got another summons in the mail for driving whilst disqualified so ill be without a licence for a while as i just got it back after a 12 month suspension, make an offer as the price is pretty firm but can remove items such as, stereo, plates, gauges etc. John.
0 likes
sickvl80Archived member
may be interested in trades for more cop friendly cars that blend in abit more than a bright orange vl turbo, John.
0 likes
sickvl80Archived member
interested in a dirt bike and cash, can organize cooler piping, exhaust, tailshaft etc. so all u have to do is buy an ecu and wire it in. price without stereo and gauges is $11,500 this car has had more than 50gz thrown at it $4000 fuel system $3500 engine $650 plenum $850 exhaust manifold $500 cooler $1500 auto $1200 diff $1400 turbo $695 gate $950 vt 300mm brakes there's over $15,500 in drivetrain without custom interior, body and paint, stereo, gauges etc. this is a bargain looking to sell now as i won't be able to drive it, John.
0 likes
sickvl80Archived member
is any one interested in a tuff vlt. also has wet 50-150hp nitrous kit and will roll on 19" vx gts for $2000 more, cheers, John
0 likes
sickvl80Archived member
c'mon people car needs to go make me an offer!!!! John.
0 likes

This discussion is closed to new replies.

Who’s online

0 members and 1 guest active in the last 15 minutes

No signed-in members active right now. Guests are welcome to browse.

Visitors Today33

33,594 threads, 484,053 posts and 6,136 images saved from CT

98.1% of indexed threads saved