pics man pics this thread sux without them.

Its a VL Calais 88 s2 VT 5ltr block stroked out to a 355, It has microtech, T400 Full manualized,Recoed 2 RX7 T3 turbos with T4 Rears, Internally it has Eagle H Beam rods and rod bolts to handle 1200hp, Custom grind chev off road crank, Bottom end studs, arp head studs, Yella terra roller rockers new valve springs and rettaniers, Surge Tank and 1 fuel pump enough to supply 700hp Bosch 044, Siemen 870cc injectors which flow 1300hp. Tell me what you guy's think. The motor is at M&M Raceing atm, Once the motor is done its heading up to RAJAB RACEING DEVELPMONTS for a dyno tune, catch can and Massive Garret race core cooler after this summer turbo's and exaust manifolds are comeing off and being sold. Bigger will be comeing, not sure what to go yet but some extractors are the go HPC'd and will be four bolting the block before i crank the boost up Update Engine is back in and i just finished running it in. Since i put the thread up i have now fitted a bosch 044 fuel pump, catch can, Garret race core coller, ICE Coil, 650 rochecter injector's which where to small wouldnt even handle 6psi, Fully rebuilt T400 full maulised with a 3000 tce stall converter and my B&M Quick silver shifter. All is left now is injectors and diff to be done. ill post some quick pics up when the weather is better and when the injectors and diff are done so i can take it out for a wash. Update Car is now and Rajab Raceing getting the 870cc simen injectors fitted, fine tune, bumpers all sprayed, New calais tail lights fitted, garnish all painted, cut and polish. Car should be back some time this next week, so photos should be up in the next week or 2. Update Just called RAJAB Raceing to speak to allan about power figures, it made on 10psi 260rwk with a single spiner diff and no traction on the dyno i was told. Maybe tomorrow or friday it will be ready to be picked up...... NEW PICS http://img132.imageshack.us/my.php?image=baykg5.jpg http://img150.imageshack.us/my.php?image=baysidejb2.jpg http://img178.imageshack.us/my.php?i...topviewwp9.jpg http://img178.imageshack.us/my.php?image=insidekh9.jpg http://img142.imageshack.us/my.php?image=sidezu5.jpg http://img139.imageshack.us/my.php?image=sunroofhs7.jpg See if you botherd to look... you would see that there up

very impressive.. do you mind me asking how much this adventure cost.. also if you get bored of the engine i have something to slap it in.. nice work *edited* as stated get more pics of the engine bay up... damn might as well make a quick vid of this thing on boost i wanna hear it open up :P cheers

Will do Jorg. Just put a bigger radiator in it,new tyres and sender unit for the temp gauge. Goes back on the dyno tomorrow as i think i need a second pump.

Haha... Nice stack of tires on the last photo... Some original photos have not been recovered yet.

bad!!!!!!!!

when u racing it man and new power figs

its back on the dyno again today

So what's doing with it? Some vids would be good. Have fun. Looking like and sounding like it should be good.

How'd it go on the dyno last week? No news is not always good news.........

just been moveing house and been realy busy. But car just needed a quick fuel adujstment.

hows it all goin now man

Still nothing new, just trying to get a hold of a VL Trubo diff. as soon as thats done ill go buy some slicks and race it

Thats tough, but we need videos :O

Wilko 16: i will for sure im just trying to get a hold of a diff, Vids will be up for sure. If anyone has a diff let me know ASAP!!!!! Finally and hopefully this is going through...... I found a 9" 31 spline, 3.9's from disc to disc, to suit a vl thats only done 3 passes!!!!!! For $1200, The guy that im getting it off said his going to pull it out tomorrow and give me a call as soon as its out. Cant wait to be raceing, i cant wait to hit the track in summer and i will hopefully get some vid's up of me soon skateing at 100k's Some original photos have not been recovered yet.

Got my 9" last night, Car is going down this monday to M&M Raceing for all new suspension, brakes and my diff to be fitted. i just bought front runner's and now im going to by some drag slicks, then im ready to race Some original photos have not been recovered yet.

Maybe ready to race next friday, Got the diff in. Now just fitting trany cooler and front suspension. Allso got my front runner's and just have to go pick up my slicks. Oh and just bought a new daily that i will be towing the race car with check it out. http://www.calaisturbo.com.au/showthread.php?t=93727

Got some bad news. My computer blew up and now it has to go back to rajab raceing for a MOTECH and twin thermos. So stay tuned . Some original photos have not been recovered yet.

keep us updated champ, looks like a good built up, v8 twin turbo. nice.

I love the red square and the white "P" on it...... Some original photos have not been recovered yet.