hey guys pumps, cells, H Beam rods, filters, pump brackets, wastegates are in stock now Some original photos have not been recovered yet.

Got a set of rods and a cell from gruntis, can't wait to pit them in the car, once again great service and gd communication. Thx princess :-)

yeh got a gate and 044 off the grunt and as said above he has a great service and just generally good to deal with thanks again scott

yer he goes alright wen he answers his phone !!!!

Quote: Originally Posted by leb vlt [View Post] yer he goes alright wen he answers his phone !!!! I call back if i dont answer! I was on the phone yesterday to paul, he said he was going to message me the address for the engine builder so i can send off the rods but he never sent it so i havent sent the rods, if you see him today ask him and message me so i can get them sent off. ---------- Post added 30-08-11 at 05:16 ---------- Quote: Originally Posted by ledouche [View Post] yeh got a gate and 044 off the grunt and as said above he has a great service and just generally good to deal with thanks again scott cheers scott let me know if you need anything else..

NOW A TURBOSMART DEALER! PM ME FOR A PRICE, COMPLETE RANGE AVAILABLE hey guys all gear in stock besides valves which are due in soon, will get more pics up of the aluminium rods soon.

hey mate, at this stage it seems like you are not going ahead with the cam covers, which is a shame, if you do, id pay 200 for one, with no logo on it, possibly make a bunch with out the logo???

i will be getting the covers but am holding out for a bit just to get everything up and running first as there is a massive outlay for the covers. ---------- Post added 07-09-11 at 21:12 ---------- but everyone will know as soon as they are ready to be made

Thanks Kirk for the great service mate. Much appreciated.

here are the fuel filters apart. ---------- Post added 11-09-11 at 19:24 ---------- ITEMS READY FOR SALE SOON -RB30 RAILS -FULL RANGE OF INJECTORS 320cc-1700cc -FUEL SYSTEM PACKAGES

have you got any 60L fuel cells with a sender with twin -8 outlets?

i can get 60ltr cells with twin -10an fittings on the sump, but with no sender ---------- Post added 13-09-11 at 20:51 ---------- PUMP BRACKETS TO SUIT PUMPS AND FILTERS RED/SILVER/BLUE Some original photos have not been recovered yet.

Quote: Originally Posted by grunter01 [View Post] Welcome to GRUNT PERFORMANCE! After months of waiting we are finally here to give you all the top quality products for your engines i will be specialising in Nissan RB30 products, but will have everything soon for your car (will provide a list of products soon), ALL PRICES ARE PLUS POSTAGE Custom oversized RB30 valves are now an off the shelf item from GRUNT PERFORMANCE, These are made from the highest grade one piece high nickel content 21-4N stainless steel, All valve stems coated in black nitride to minimize valve stem wear. will provide pictures asap for you all. Valves +1mm oversized inlet valves $200 per set COMING SOON +1mm oversized exhaust valves $200 per set COMING SOON +2mm oversized inlet valves $210 per set COMING SOON +2mm oversized exhaust valves $210 per set COMING SOON +3mm oversized exhaust valves $220 per set COMING SOON I am currently looking into RB25/26 valves also so they should be here shortly RB30 H-Beam/I-Beam - Tell me what engine you have and i will get H-Beam 4340 grade rods for it for only $85 per rod.... i have over 750 different engine types that i can have these rods made to... if i dont have them in stock i will order them. - Custom rods can be made for any engine for only $120 per rod as long as you provide the specs. All these prices are with out rod bolts H-Beam Billet steel 4340 grade -$500 per set with out bolts - $650 per set with ARP2000 bolts Weight - 510 grams Big end - 53mm Big end width - 21.8mm Small end - 21mm Small end width - 21.8mm Centre to centre - 152.5mm Matched weight - +-1.0grams 1> Connecting rod Material: 40CrNiMoA(4340) Forged Steel. 2> Hardness after quenching and tempering is HRC33-38. 3> Special Dowelled cap for alignment 4> X-RAY & Sonic tested 5> Silicon bronze bushings 6> Fully machined to produce the lightest and strongest rod possible 7> Shot peened 8> 100% Magnafluxed I-Beam billet steel 4340 grade - coming soon -$500 per set with out bolts - [COLOR="red"]$650 per set with ARP2000 bolts Weight - 510 grams Big end - 53mm Big end width - 21.8mm Small end - 21mm Small end width - 21.8mm Centre to centre - 152.5mm Matched weight - +-1.0grams 1> Connecting rod Material: 40CrNiMoA(4340) Forged Steel. 2> Hardness after quenching and tempering is HRC33-38. 3> Special Dowelled cap for alignment 4> X-RAY & Sonic tested 5> Silicon bronze bushings 6> Fully machined to produce the lightest and strongest rod possible 7> Shot peened 8> 100% Magnafluxed I-Beam titanium grade 5 - coming soon - $2000 per set with out bolt I-Beam billet Aluminium grade - $700 per set with out bolt - $850 per set with ARP2000 bolts Weight - 324 grams Big end - 53mm Big end width - 21.8mm Small end - 21mm Small end width - 21.8mm Centre to centre - 152.5mm Matched weight - -+1.0grams 044 PUMPS FOR 700-800 HP APPLICATIONS 300lph rate at 3 bar fuel pressure (43.5psi) 200LPH @ 72.5psi (5 bar) INLET CONNECTION: M18X1.5 OUTLET CONNECTION: M12X1.5 LENGTH: 196 mm DIAMETER: 60 mm MAX POWER/Cons(Amps): 15.5 come with 6 months warrentee - $55 for limited time FUEL FILTERS Washable filters -6an - $40 each Washable filters -8an - $45 each TURBO OIL LINE FILTER -4an - $20 each -6an - $20 each SURGE TANKS 2.5ltr 2 x -8an Outlet 3 x -6an feeds - $135 each 2.5ltr 1 x -8an Outlet 3 x -6an feeds - $120 each FUEL CELLS 40ltr Cell -10AN fittings Twin Outlet - $220 each OUT OF STOCK EXHAUST WRAP Ceramic wrap 50mm x 2mm x 10mtrs 1200deg - $30 each TURBO BEANIE T3 - $90 each T4 - $100 each PUMP BRACKETS ANIDIZED RED/SILVER/BLUE - $20 each NOW A DEALER OF TURBOSMARTS GEAR! PM ME FOR PRICES, COMPLETE RANGE AVAILIBLE hi mate im intrested in that 044 fule pump, is that prise includeing postage??? and do you have any after market cams for an rb30 (vl turbo) i what something with a rough idle and and enough power gain for a reasanable prise chears Nathan Some original photos have not been recovered yet.

pm sent , all products are plus postage.

will the t4 turbo beanie be big enough for a 35/40 with 1.06 rear ?

do you think youl get forged pistons made? would they be cheaper than the other brands if you did? youd sell heaps i rekn

Quote: Originally Posted by -pumba- [View Post] will the t4 turbo beanie be big enough for a 35/40 with 1.06 rear ? yes the t4 beanie will fit the gt3540 with the 1.06 rear on it, it will fit up to the 1.36 rear. ---------- Post added 21-09-11 at 09:51 ---------- Quote: Originally Posted by joe blo [View Post] do you think youl get forged pistons made? would they be cheaper than the other brands if you did? youd sell heaps i rekn yeah i am looking at the pistons at the moment, but they wont be ready for a while as im going to get them made then put them in to testing first and try and break them then once we are happy they go for sale as rod and pistons packages or sell on there own.

1700cc injectors only $100 each delivered coming coon GRUNT rb30 rail suit 14mm injectors $200 delivered RED/BLUE/CHROME Static Flow Rate: 152lb/hr = 9.42g/s = 1680 cc/min (+/-4%) Dynamic Flow Rate 2.5ms PW @ 100Hz: 16.9 mg/pulse (+/-4%) Coil Resistance: 2.35 Ohms / Low Impedance / Low-Z (Peak/Hold driver circuit required) Connector: Minitimer (Bosch EV1) Factory fitted with Viton upper and lower o-rings. These injectors flow 1600 cc/min at 43.5 PSI ( 3 BAR ) and are fully compatible with alternate fuels and alcohol! Some websites may refer to their flow rating as 160 lb/hr or 150 lb/hr or 1680 cc/min Bosch Low Impedance Injectors. Frequently used in racing, flex fuel applications and alternate fuel applications, these low impedance injectors combine extremely high flow rates with excellent response at low pulse widths! This allows you to use a larger injector than normally possible without hurting idle and low speed drivability. These injectors are able to function at high fuel pressures and don�t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

RB30 RAIL with 6 x 1700CC injectors ONLY $699 DELIVERED (EXPRESS)

NEW GEAR RB30 arp head stud kits = $284 RB30 arp main stud kits = $220 RB30 cometic head gaskets = $264 RB30 king big end bearings = $55 RB30 king main bearings = $130 RB30 powerbond 25% underdriven balancer = $250 RB30 vernier adjustable cam gear = $280 RB30 heavy duty auto flexplate = $345 RB30 dual valve springs .470"-.480" lift / 90 pound on seat / 220pound @ 10mm lift = $100 RB30 kit dual valve springs with retainers .600" lift / 120 pound on seat / 250 pound @ 10mm lift = $180