Ok back in Australia.. still trying to catch up.. I promise it will be in the next few days.

Quote: Originally Posted by GMH05 [View Post] Hi mate i need 11 meters of 3/8 braided line teflon to suit e85 1x -6 120deg braided fitting 1x -6 180deg 4x -6 90deg how much? Thanks PM Sent. Just remember if you are a Gold or Silver member to CT you will get a discount.

Duke man, im going to need -12 and -16 braid, probably 5 meters or so of each. What price am I looking at man?

Quote: Originally Posted by 88 Chaser [View Post] Duke man, im going to need -12 and -16 braid, probably 5 meters or so of each. What price am I looking at man? PM Sent. ---------- Post added 16-11-10 at 15:07 ---------- Time to shake things up a little.. Time to have a Missile Performance SALE. Braided Rubber & Teflon Hose - 10% for non members - less 15% for members. You buy a large amount and I will discount it further. Want me to take some $$$$ off fittings... AN-12 Straight Hose End - $25ea You save $6 AN-10 Straight Hose End - $20ea You save $3 AN-08 Straight Hose End - $14ea You save $3 AN-06 Straight Hose End - $12ea You save $3 AN-04 Straight Hose End - $14ea You sace $3 AN-12 90 Deg Hose End - $45ea You save $20 AN-10 90 Deg Hose End - $35ea You save $15 AN-08 90 Deg Hose End - $32ea You save $10 AN-06 90 Deg Hose End - $27ea You save $8 AN-04 90 Deg Hose End - $27ea You save $13 For other odds and ends email me. I have 180's, 45 deg fittings in stock. These prices last for this week only... get in quick. I will need a deposit of 10% to confirm orders if you want to pay next week.

hey, Harrop TrueTrac center can 31 spline axle be fitting to them thanks gerry

Hey mate You forget about me :P lol ill send a copy of our email convo to you with the list etc. by the way do u think for the standard t3 should i use a straight hose end to connect to the oil feed on the turbo or would a 90 deg piece be a better choice hope to hear from you Mark

Quote: Originally Posted by elare69 [View Post] hey, Harrop TrueTrac center can 31 spline axle be fitting to them thanks gerry Hi, Yep but you need to order it custom from Harrop. ---------- Post added 21-11-10 at 13:09 ---------- Quote: Originally Posted by MarkZ [View Post] Hey mate You forget about me :P lol ill send a copy of our email convo to you with the list etc. by the way do u think for the standard t3 should i use a straight hose end to connect to the oil feed on the turbo or would a 90 deg piece be a better choice hope to hear from you Mark Here I was thinking I got through everything I should of.. My apologies, I will go over your email when I am sitting in the office and give you a detailed reply including updated pricing to include all the specials. Thanks Luke

Hay.. Can you send me another M of -4... love you long time. PM me price n ****.

Quote: Originally Posted by [T]Matty [View Post] Hay.. Can you send me another M of -4... love you long time. PM me price n ****. Good Sir, you have a PM

I will match or beat any quote from now until Christmas :) Think you can get it cheaper elsewhere. You can't. Email me a legitimate quote from a reputable dealer, not some ebay lacky selling no name fittings and I will better it.

Asked for hose on Wednesday in 3 posts above this one, got it today.. What else can be said. thanks so much mate.. good man.

Quote: Originally Posted by [T]Matty [View Post] Asked for hose on Wednesday in 3 posts above this one, got it today.. What else can be said. thanks so much mate.. good man. No probs mate. Enjoy :)

How much per meter for -8 braid to suit E85 mate, so teflon i'm guessing? Also can you get the hardline adaptors in silver/black? I know you don't really look under the car but all my other fittings are silver/black.

I probably can get them in silver/black combo but they would be PFE or Earls and not sure on the price of them. I will call the manufacturers tommorrow and see what I can come up with. It may not be the easy hardline adapters either, you may have to settle for tube and nuts and buy a 37 deg flaring tool. I will see what I can find out anyway. The AN-8 Teflon is $45 p/m Thanks Luke@Missile

Quote: Originally Posted by Duke57TT [View Post] I probably can get them in silver/black combo but they would be PFE or Earls and not sure on the price of them. I will call the manufacturers tommorrow and see what I can come up with. It may not be the easy hardline adapters either, you may have to settle for tube and nuts and buy a 37 deg flaring tool. I will see what I can find out anyway. The AN-8 Teflon is $45 p/m Thanks Luke@Missile All my other fittings are earls mate so that would be cool. Let me know, if I can get away without needing to flare the line would be good, if not i'll just strip the coating off the red/blue ones.

The Earls are a nice fitting and work well, just bloody over priced.

I can get the hardline adapters in black up to 5/8" and the teflon fittings I am still chasing down for you in black. :) Setup a GT35r on a top mount manifold today.. I'll get some pics up through the week.

Quote: Originally Posted by Duke57TT [View Post] Got your email bud, will talk to you soon. Now for something a little interesting. Pricing is indicative at this stage, but for CNC's flanges with gaskets and bolts + NPT to AN adpater of your choice it will be around $35 + postage. I want to play with them first. :p The GT mid frame stuff is coming, and then I'll do some GT large frame. Thanks Luke@Missile have u used these yet ? Some original photos have not been recovered yet.

Hey mate I wanna run 1/2 line straight of the back of my 044 pumps is this possible, then they run to a y piece and then through the bulkhead on the boot floor

Quote: Originally Posted by BT [View Post] have u used these yet ? I had a play with one last night actually, not 100% happy with them. The fit quite well but the NPT thread needs a little work as the CNC process has left a little to much meat on nose of the thread. Going to clean them up with a NPT tap this week and make sure they are 100% perfect before I sell them. ---------- Post added 03-12-10 at 10:21 ---------- Quote: Originally Posted by osk [View Post] Hey mate I wanna run 1/2 line straight of the back of my 044 pumps is this possible, then they run to a y piece and then through the bulkhead on the boot floor Hardline aluminium? or where you thinking braided hose? Either way is possible.