Quote: Originally Posted by vl4skids [View Post] Lol 2.2 60ft. That thing has a 1.4 in it eeeeeaaasssy. Get pics up of the shell asap! haha yeah i would love to see that on some chinese **** $110 tyres haha.... ---------- Post added 06-12-12 at 05:16 ---------- Quote: Originally Posted by 7FOUR7 [View Post] can't wait to see the new one! Was hoping to see 135mph on 18s haha ---------- Post added 06-12-12 at 01:59 ---------- ps 128 is still awesome on 18s :P yeah it would have been heaps more mph but couldnt stand on it as it would just wheel spin.... I iwll get the pics up when i pic the new shell up guys, which will be just before new year.....

ok guys new toy has been arranged for pickup on the 28th of dec, I will be parting out the parts i do not need.... Full roll cage including under dash bar, taxi bar, side intrusions, complete bar out into boot to retain parachute mount. Parachute Sheet metal dash holding Stewart Warner 50mm Guages VOLTS WATER TEMP OIL PRESSURE BOOST TRANS TEMP FUEL PRESSURE Dash also holds Autometer Tacho shift light and low oil pressure light INNOVATE LM-1 METER, - FOR SALE INNOVATE LMA-3 MULTI SENSOR INPUT MODULE, - FOR SALE 3spd shifter - FOR SALE mounted chute lever 6AL MSD ignition - FOR SALE painless control switch panel single RCI One piece moulded drivers seat and padded cover, 75mm race harness, Morroso Oil Accumalator, 45ltr Fuel cell, - FOR SALE 2 x Bosch 044 fuel pumps - FOR SALE EFI Fuel Regulator. - FOR SALE 9" diff disc brakes 35 spline axles Strange alloy carrier 4.11's full spool, WELD Racing wheels PRO STARS [Front] 24 x 4.5 x 15 with M/T Front runners [Rear] 26 x 11.5 x 15 with M/T ET STREETS. Single 3.5" piece custom made Tailshaft with strange uni joints. Some original photos have not been recovered yet.

Which shell is it? What sort of weld wheels, and a backspacing and stud pattern if possible. What sort of chute? Pm me if you like mate

pics are up now man... i will get more once i pic it up

Ok just picked up the new roller, need some things like rear lights and garnish and so on but a good starter... ---------- Post added 28-12-12 at 19:17 ---------- Some original photos have not been recovered yet.

Happy with the new toy Kirk ?

To be honest George I havent really looked at it properly yet.... You put the diff in yet?

how much you want for the 044's? and willing to post?

Not yet mate . Still have to proof coat under the car first , might do that tomorrow .

Wanna get it home first mate before I go saying anything

just some pics on what the cars are up to atm, chilling in the shed.... Got a 9" 35spline for the street car for the moment to get her going again... Once again i am thinking of going a different way with my car ( i have issues with decision making i think ) so i am thinking of selling the drag roller and just doing my other car.... If someone is interested please let me know... Cooler pipe seem welded on now... Some original photos have not been recovered yet.

Why is this happening mate? 40psi, bigger tyre, 8's all day drive it on the street thankyou!

just thinking of buying a finished shell painted and trimmed and later on caging it and mini tubbing.... If i sell this roller i have some cars in mind i want to buy. There is nothing wrong with the roller only needs ecu, trans, engine... it even comes with andra logs books. ---------- Post added 19-01-13 at 23:54 ---------- also if i do get the new shell im sure you will like it....

Price for roller?

PM me an offer ---------- Post added 20-01-13 at 10:45 ---------- HERE IS A RUN DOWN ON THE CAR AND WHAT IT HAS, CALL OR PM IF YOU ARE INTERESETED Full chromoly 6 point roll cage including under dash bar, taxi bar, side intrusions, Re-enforcment bars to rear seat, complete bar out into boot for parachute mount. DIEST Parachute with lever at shifter NOS bottle holder with lines Extinguisher Full clip on removable steering wheel with transbrake button Aluminium Sheet metal dash holding Stewart Warner 50mm Guages VOLTS Gauge WATER TEMP Gauge OIL PRESSURE Gauge BOOST Gauge TRANS TEMP Gauge FUEL PRESSURE Gauge Dash also holds Autometer Tacho shift light and low oil pressure light INNOVATE LM-1 METER, INNOVATE LMA-3 MULTI SENSOR INPUT MODULE Precision 3spd shifter 6AL MSD ignition MSD Blaster coil Transmission cooler with lines Toggle control switch panel Single piece JAZ pro stock drivers seat and Vinyl padded cover, 75mm race harness, Morroso Oil Accumalator with Braided lines to engine bay 45ltr Fuel cell, 2 x Bosch 044 fuel pumps, brackets, check valves EFI Fuel Regulator FE2 suspention Crysler shocks Boxed trailing arms 9" diff Disc brakes 35 spline axles 1/2" wheel studs Strange alloy carrier 4.11's full spool, WELD Racing wheels PRO STARS [Front] 24 x 4.5 x 15 with M/T Front runners [Rear] 26 x 11.5 x 15 with M/T ET STREETS. Single 3.5" piece custom made Tailshaft with strange uni joints. Brand new front bar Bonnet pins Shaven door locks kirk [phone removed] ---------- Post added 20-01-13 at 18:26 ---------- DID abit of work to the car today, Just put the new 9" in, also put the tail shaft and strengthend lower control arms then put in the cooler piping, And was that a fcuking prik of a job. Now just need to get the head re-torqued down then 35-40psi here we come. So hopefully have that done and retuned in the next 2 weeks. Also i think the diff has been shortened abit but wont know till i get new 1/2" wheel nuts. Also this is the innovative logger that comes with the roller. ---------- Post added 20-01-13 at 18:57 ---------- THE ROLLER HAS RUN A BEST OF 9.06 @ 151mph. I want 8k for the car as it is which is ready to rumble with a box, engine, ecu.... If no one is interested in this thread i will advertise it. I know the car is worth this easily Some original photos have not been recovered yet.

ok shell has a deposit on it now so it will go in the next 2 weeks. I am going to spend the money on a car for the misses and just build mine then i know its done properly. I have been looking at prices on getting it tubbed, 4 linked, coil overs, cage done and will slowly chip at it all. The car has had some bits fixed on it while off the road and should be on the road by the end of the weekend and also get more power put in it for power cruise next week. - Welded a bead on the intercooler piping - replaced the over flow bottle cap as was causing water system to pressurise - Replaced BW with 9" 35spline diff - Single 3.5" piece Mark williams tail shaft - Billet uni caps - -10an teflon return lines and fittings - Transbrake button plate on the carbon shifter - replaced brake line block - Strengthened trailing arms - 21psi base pressure waste gate springs I think thats all i have done but cant remember, but hopefully will be going this weekend and will do a victory powerskid out the front if the rain ****s off...

I hope to see a video of this victory powerskid you talk of!

Terrorise your neighbours some more lol . They must love you Kirk

Yeah they do

Car is finally alive again and load up on the trailer and getting retuned tonight so i hope it gets a better result then before.