Quote: Originally Posted by BlackVL Got my cooler delivered the other day, not that impressed with the packaging. Some of the fins on cooler were slightly dinted and one of the ends tanks had a lot of scratches and marring. Looks like TNT were rough with the box (had Fragile marked on it), as the sides where the cooler ends were sitting was starting to tear. Overall though good kit for the price (pre-buy), just wish the packaging was a little better, especially if I had of paid full price. Hope this is constructive feedback Greg. Cheers We've got a new guy packaging. I'll speak to him to ensure it doesn't happen again. Sorry about that. Greg

Has anyone put one of these kits in their VL running a RB20? Did there need to be much piping modded?

Quote: Originally Posted by gktech We've got a new guy packaging. I'll speak to him to ensure it doesn't happen again. Sorry about that. Greg should get onto the welders aswell, two pin holes in one of my pipes, very very very small, but i filled em up anyway at work. but great kit for the price, couldnt be happyer :D

Quote: Originally Posted by Bigkeels If I have already got a 600x300x75 cooler core, will the no holes piping fit it? Or do you have other piping available? Unfortunately our piping kit only fits with our exclusive 895x230x76mm core, although there have been a few customers that have purchased our kit and modified the piping to suit a 600x300x76mm.

hey greg whats needed to make ya piping fit one of ur 600x300 coolers? will u sell the piping on its own with the silicon joiners? pm me if u wish mate..

Quote: Originally Posted by lil_timmy Has anyone put one of these kits in their VL running a RB20? Did there need to be much piping modded? ???

Quote: Originally Posted by Lazza78 hey greg whats needed to make ya piping fit one of ur 600x300 coolers? will u sell the piping on its own with the silicon joiners? pm me if u wish mate.. I haven't personally fitted the piping kit to a 600x300 cooler but as the 600x300 will sit 70mm's lower and be approximately 50mm's shorter on each side the difference will have to be made up somewhere.

hey greg...do you have 600x300x76 [core size] ----> [Overall length of 780mmx330mmx76mm] coolers with full piping kit made to fit? could you please give me a price for that...fmic 600x300x76 kit and piping are going for bout $400 atm...im in melb so i could mostlikley pick it up thanks -jason Quote: Originally Posted by gktech I haven't personally fitted the piping kit to a 600x300 cooler but as the 600x300 will sit 70mm's lower and be approximately 50mm's shorter on each side the difference will have to be made up somewhere.

Has anyone fitted this on an rb30det with au falcon thermos? I dont think there will be enough room with the pipework. Would it be alot better then an avo stage 2 with new end tanks on it. (3"). I really just want to get rid of the holes. Also is there a high mount kit. thanks.

Quote: Originally Posted by jz_vl hey greg...do you have 600x300x76 [core size] ----> [Overall length of 780mmx330mmx76mm] coolers with full piping kit made to fit? could you please give me a price for that...fmic 600x300x76 kit and piping are going for bout $400 atm...im in melb so i could mostlikley pick it up thanks -jason We only have these kits for the VL's. Sorry :(

Id like to know about the thermo question before i go ahead and order.

Good luck with au thermos Bogz. They dont work real well on VLT's. STD fan clutches are still being ran on low 9 second vlt's.

i wouldnt mind putting thermos in mine as well ahs any1 done it iv had my kit for over a year now and working fine

how long ta post ta sydney and how much delivered

gk tech i need piping for a 600x300 cooler with 3" inlet and stock turbo setup... wudnt mid 2.5" ....3" maybe tight what u think? pickup

Quote: Originally Posted by vlwagz i dont want to have to put my AFM there but if i have to i will. fit it down lower, behind the fan shroud, id say you would have to extent the wiring for the afm a little. but it will be hidden away nicely down there.

top kit put 1 on today bit of stuffing around tho when ya gota move tranny coolers as well

PM sent

thanks greg cant wait to put on my car will post pics as soon as i get it done

does the pipe on the drivers side go over or under the power steering line?