hey mate do you still do them as i need to mains done one for my vk and one for the vl calais are playing up cheers

I also need mine done how much do do 2 front switches?

my rear 1s will not work but when you use the 1s at the front to work the back it works??? and gee there slow is this normal???

i need sunroof switch?? ANYONE out there or can i just put any switch??

best way to contact matt would be email. he hasnt been on here since 09

Guys, spray some armour-all into the window slides(or some type of lubricant?) and will make your windows go up and down quicker.

Do you still do this? as I need mine done? or does any one else know where I can get it done?

Yer still doing it, hit my email below as i hardly come on here anymore

The correct product for your window guides is a product called DRY GLYDE spray in the grooves.If you use a wet product all that does is collect dust,Also remove the door pannels and lube the moving componates of the window regulator. Cheers Marty

Is there an easy way to take it apart and clean it yourself without breaking it?

Yeah you just have to carefully trim the 5 or 6 tabs on the back where they look like they are melted/glued with a sharp knife to free them and then the surround will pop off. Clean the contacts with some electrical cleaner and maybe turn them 180deg before putting them back in

Quote: Originally Posted by PSI086 [View Post] Yeah you just have to carefully trim the 5 or 6 tabs on the back where they look like they are melted/glued with a sharp knife to free them and then the surround will pop off. Clean the contacts with some electrical cleaner and maybe turn them 180deg before putting them back in Any more info on how to open these? Can't really see how it pulls apart?

Just cleaned my switches contacts with acid, still doesnt work... Have emailed Matt Some original photos have not been recovered yet.

fixed my front, but id love to know how to open rear switches, broke one trying to do so

Quote: Originally Posted by PSI086 [View Post] Yeah you just have to carefully trim the 5 or 6 tabs on the back where they look like they are melted/glued with a sharp knife to free them and then the surround will pop off. Clean the contacts with some electrical cleaner and maybe turn them 180deg before putting them back in Not quite, there is a better way ---------- Post added 05-01-14 at 21:05 ---------- Quote: Originally Posted by F2thaK [View Post] fixed my front, but id love to know how to open rear switches, broke one trying to do so You need a special tool to open them