Hey guys had a question just wondering how use recommend to fit a 3582r on a stock low mount manifold, I've bolted up the turbo and manifold with the 20mm spacer and I tried putting it all on at once but didn't work was thinking taking the engine mount off jacking the car up then installing the turbo and manifold but wouldn't mind a easier solution cheers.

i used a factory turbo manifold. 20mm spacer and didnt have any dramas fitting wise. i did need to shave down the front of the engine mount to allow fitting on a pod filter. what size rear are you running on the turbo. mine was a .86 and all fitted well