Preserved from CalaisTurbo. Original authors and dates are shown; archived members are not current Holdcom accounts.
Hey guys just after a little help. Ive got a microtech going in my vl with a stand alone loom and i need to know how to wire up the alternator for the dash light. As the new loom doesn't have the two pin plug like the factory loom does
0 likes
the microtech wont have anything to do with the alternator wiring.
the thicker wire out of the 2 pin plug goes to the battery and the thinner one goes to the light on the dash. if you get really stuck ill have a look at mine and let you know which one it is on the black/blue plug behind the blower fan
0 likes
Ive got the charge wire on the back off the alternator connects on a 10mm nut going to the battery. But that oval 2 pin plug on the alternator is what im not to sure off. Can take a pic if that helps
0 likes
yeah man take a pic of what you have done already
0 likes
well wried up the thicker wire to the battery and thinner wire to the dash and the dash light comes on. but strange when i turn the light on with no ign on. the car turns on fuel pumps. ecu . etc
0 likes
