People often overlook the importance of a well maintained fuel system, poor performing fuel pumps, blocked fuel filters and underperforming or miss matched injectors are all common issues which lead to catastrophic engine failure, especially in boosted engines. Running our own motorsports team has led to a lot of in-house development. Especially around the EFI component of our cars, this lead to construction of our own Injector Test and Flow Bench. Controlled by a Haltech PS2000 we have total control over every aspect of the injection timing and firing. And a fuelling system large enough to flow injectors at sizes of 5000cc and above. A variable voltage source then gives greater control for us to be able to test and create injector dead time tables to suite all injectors and injector configurations such as multiple injectors per driver. Our injector cleaning service utilizes all this so that we are able to flow and check the performance of each injector to make sure they are ready and safe to use again. Each injector clean and flow includes the following.Coil Check External Clean Ultrasonic Clean Filter Baskets and O-rings Replaced Where Required Flow Cleaned and Tested Spray Pattern Inspection Once a set is completed a detailed report including the following is provided. All tests come with a details report which includes the following.Test Voltage Fluid Temperature Fluid Pressure Fluid Specific Gravity RPM Flow Differential Injector Flow Rate CC/min The injector cleaning and flowing service is $25per injector. Contact us on [email removed], through PM or on [phone removed] Alternatively the injector cleaning and flowing service can be purchased through the website by clicking HERE (http://www.quickbitz.com.au/index.php?route=product/product&path=65_86&product_id=749) Some original photos have not been recovered yet.

Thought id post up some details of some injectors we recently had in to show just how much flow differential a set of injectors can have. We got these Bosch 2200's like this. They showed a 8.8% flow differential over a 20 second window. The below image is the difference over 1 min. After a clean/service they came up looking pretty good. And the flow differential came down to 2.5% over 20seconds Some original photos have not been recovered yet.

WOW – is there normally such a difference in flow with second hand injectors?

Quote: Originally Posted by CALJAS88 [View Post] WOW � is there normally such a difference in flow with second hand injectors? No not always, but its not uncommon. Its def more common when injectors have been sitting around for a while after using fuels like E85 and Methanol.

Recently had my injectors cleaned and flow matched from QuickBitz and would definitely recommend this service anyone. Peter was quick to respond to all emails, the turnaround time to clean and flow match was 1 day and the injectors were returned by express post. Very happy with the results and Peter went out of his way to explain the results in detail and give feedback how my injectors performed. At a great price, i'll definitely use this service in future.

I want to make company car repair shop, and I need a lot of video tutorials as your service. Where can I find or purchase special video service car from beginner to advanced?Thank you very much,