Hey guys, Im putting a cooler on my motor and moving the AFM to the pressure side. I have made up a small dose pip thats on the turbo But since I'm not using an intake pipe to the AFM which i had a barb fitting on to "suck" the oil breather from the catch can to the top of the rocker cover... What do most people do? I could plumb a barb fitting into my dose pipe so it will still work the same way, but i haven't heard of many people doing that.... I could just block the hose also, but then i wouldn't imagine many "oil fumes" leaving the rocker cover due to no suction occurring. Then on the other hand.... If i run a dose pipe, im hardly doing it for performance and smooth engine operation.... Feedback would be appreciated...