Gday boys, after being parked in the shed for like a yr ive brought out my vn ss to continue to play with and ive noticed a problem with the rear end. The car sat idle in the shed for over a yr on 4 flat stocky tyres and was only routinely started. So i picked up some 17x8.5 rims with 235 45 rubber and whacked them on. Thought nothing of it then i was thinking of checking the tyre clearance to see if i could fit 245s on and then i noticed uneven gaps between the guard lip to the top of the tyre. hmm interesting For some reason the drivers side rear is sitting about 12mm lower than the passenger side and what appears to have abit of toe in on the rear drivers wheel. Car is on pedders lowered suspension and is fairly low. Ive had 18"s on it in the past and never noticed anything then. So what would most likely be the problem? Spring has sagged on the drivers side and would that cause the abit of toe in and the difference in height?. Has an adjustable panhard rod on it . Ive checked the springs and there seated properly. So im stumped!