hey guys just want some ideas or what people have done. im doing hidden wiring on my vl and the part im not sure about it on the drivers side. what i can do with the battery loom harness and wiring. my battery is going in the boot. but not sure where the harness from the battery loom can go. any feedback or help would be great and even some photos
I moved all the standard stuff behind the dash but it was still messy, ended up rewiring the car from scratch. Look into Ez-wiring kits, makes it so easy.
Quote:
Originally Posted by morhiusvz
[View Post]
I'm doing mine now and the relays from beside the battery I put behind the cluster
Sent from my iPhone using Tapatalk
hey bud you wouldnt have any pics you could show
I want to do the same for mine, i have seen various people tuck there wires behind the guards leaving small holes for the headlight wires. There vl is a build thread and he explains how he did it, ill try link it to you if i find it
Some original photos have not been recovered yet.
sorry i took so long
So there were 2 relay's where the battery was and a small vr fuse box as i have an injected 5l 2 relay's went behind the cluster and the vr one is currently hanging on the passenger side
Easiest way is to run them down to the starter motor under the brake booster. Just need to chop the ends off to the right length and put new terminals on. I actually pulled them all back through the firewall in mine and drilled a hole at the front of the drivers side of the tunnel and ran them out there
