Preserved from CalaisTurbo. Original authors and dates are shown; archived members are not current Holdcom accounts. View original archive ↗
Hi , my Calais turbos we can't seem to get it to fire at all , it's been sitting for about 6 months,
We've changed crank angle sensor, coil , ecu , plugs leads,
It's turns over but can't get any spark at all ,
Any help would be great , thanks
0 likes
try replacing the black transistor module on the side of the dizzy?
0 likes
Quote:
Originally Posted by 12maneym
[View Post]
try replacing the black transistor module on the side of the dizzy?
Cheers mate , just tried that now but still nothin !!
0 likes
have you put new plugs in it? is there spark at the coil?
0 likes
No spark comin out of the coil ! Tried a few different coils ! I haven't put new plugs in it .
Thanks foryour help
0 likes
Disconnect coil from loom . Turn ignition on and check for power at the coil plug should be constant 12v with ignition on . Computer fires the ground signal . But make sure thers is power ther first !
0 likes
is the dizzy turning when you crank????????????
0 likes
Thanks fella ,
it ended it bein a broken signal wire from the cranks angle sensor ,
In the engine loom ,
0 likes
