Hoping someone can help me, i'm trying to pull my diff apart at the moment and am having trouble getting the axles out. Any help would be appreciated. Pictures are of what the diff currently looks like. [IMG] (http://s1326.photobucket.com/user/jay3lturbo/media/IMG_7428_zpsaa6cb9b7.jpg.html)[/IMG] [IMG] (http://s1326.photobucket.com/user/jay3lturbo/media/IMG_7426_zpsf65ce61c.jpg.html)[/IMG] [IMG] (http://s1326.photobucket.com/user/jay3lturbo/media/IMG_7429_zps450721b4.jpg.html)[/IMG] Some original photos have not been recovered yet.

You see those three holes next to the studs? Rotate the axles until you can see a nut through one of those holes. There will be four on each axle. Undo them, and you will be able to pull the axle out of the housing (fair bit of force required, don't hit yourself in the nuts).

Quote: Originally Posted by 5spdvl [View Post] You see those three holes next to the studs? Rotate the axles until you can see a nut through one of those holes. There will be four on each axle. Undo them, and you will be able to pull the axle out of the housing (fair bit of force required, don't hit yourself in the nuts). Sweet. I've already done that, might just need to hit them out a bit harder then. Will definitely renember to not hit myself in the nuts haha.

Undo the 4 retaining bolts as mentioned above Bolt wheel back on and use it to pull them, or slide hammer through the hole. Shimmy the retaining plate through the h/brake assy and pull out. Just make sure you pull them out straight and evenly as not to damage the tube face.

Tried to do it like you mentioned, but it wasn't budging. My last resort before throwing it off the local bridge was to mount the rotors on backwards and hit it a few times with a mullet-and it worked, and everything's in perfect condition. Cheers for the help though guys, appreciate it nonetheless. [IMG] (http://s1326.photobucket.com/user/jay3lturbo/media/dc21714e-9e7a-4bec-a0bb-233d6cbfee55_zpsfaac0d25.jpg.html)[/IMG] Some original photos have not been recovered yet.