Hey Everyone, I have bought a complete engine so I don't need to build mine anymore. I was building this as a 600hp potential engine (with supporting bolt ons), the list is below. MAHLE PISTONS (RB30DET but was using them as a single cam, 8.5cr) SPOOL RODS KING MAIN AND BIG END BEARINGS NITTO/N1 OIL PUMP WITH BILLET GEARS AND PETTERSON EXTERNAL REGULATOR ARP MAIN AND HEAD STUDS ARP FLEXPLATE BOLTS OVERSIZED STAINLESS 8MM STEM VALVES KNIFE EDGED, LIGHTENED, DOUBLE NITRITED CRANK WITH SNOUT BUILT UP AND MACHINED TO SUIT OIL PUMP, HAS HAD OIL GALLERIES DRILLED AND TAPPED BLOCK HAS BEEN BORED AND TORQUE HONED TO SUIT PISTONS, ACID BATHED AND CRACK TESTED STANDARD RB30 COMPLETE HEAD All parts for the bottom end are brand new and have only been used to dummy up the block for assembly, the bottom end only needs a final clearance check, linish and can apparently be put together (according to engine builder, KJ MOTOR MACHINING, I have a list of what needs to be finished off as well of what’s been done). Will get pics and part numbers up soon, just don't have them with me on this computer. The engine basically just needs the bottom end assembled and put whatever head you want on it, or just throw the standard head on it for now. Chassing $3500 (half of what this has cost me already) Any questions just ask, don't mind shipping at peoples expense, located in Brisbane. Cheers Stefan ([phone removed]) http://img856.imageshack.us/img856/7088/img0236oe.jpg http://img202.imageshack.us/img202/4557/img0237zgr.jpg http://img33.imageshack.us/img33/1077/img0238az.jpg http://img203.imageshack.us/img203/599/img0239lu.jpg http://img84.imageshack.us/img84/1449/img0241m.jpg http://img841.imageshack.us/img841/6806/img0244gb.jpg http://img685.imageshack.us/img685/3159/img0245eg.jpg

pictures added

bump, open to realistic offers