Hey im after an RB20E or RB30E (Manual) cable that runs from the right front gearbox to the plug near the brakebooster that allows the car to start with the key. Also the reverse light cable that runs from the back right side of the gearbox to plug near shifter. Also after a good set of calais taillights with middle rear garnish Call or text anytime 02040014445 Ive got vl car parts if you would like to trade or do a deal with what i need.

hi theres a plug u can bridge a couple of wires on thatll allow the car to start ( i take it your car was an automatic) . cant remember what color wires they are now but someone on here will know. as for the tail lights and garnish, you can buy new taiwanese copys for pretty cheap these days, easier than trying to find a good set of holden ones.

Mine was auto yea but ive allready tryed to bridge the wire doesnt work for some reason, it does start but i need to pull the wire out at the last second onces its running. Also where do you get the taillights from?

Mike, try this guy for the tail lights! http://www.trademe.co.nz/Members/Lis...member=1342788 (http://www.trademe.co.nz/Members/Listings.aspx?member=1342788). Can't think of the outfits name. They deal with tawainese reproduction parts. You could get a price from NZ-SXYHDT to paint your garnish. You could just have it repainted black and you redo the pinstriping yourself if your wanting to save some money. Have you bridged the 2 purple wires that are for the neutral switch? There are in a relay that sits up near the battery. Some guys bridge them or even put a switch in there as another security option. Make sure you remove the auto computer under the drivers side dash too.

ohhhh is it that little black box near the bonnet handle? if so that must be why it wont start well leaving the wire in the plug Thanks for the link, ive got a calais garnish but it has crazy cracking in it. i was thinking of getting on of those stickers off ebay and just repainting it. thanks alot man

Be car parts, run through braxtons car lights. http://www.becarparts.co.nz/ They have quite a lot of vl parts

thanks mate

Quote: Originally Posted by NZER [View Post] Mike, try this guy for the tail lights! http://www.trademe.co.nz/Members/Lis...member=1342788 (http://www.trademe.co.nz/Members/Listings.aspx?member=1342788). Can't think of the outfits name. They deal with tawainese reproduction parts. You could get a price from NZ-SXYHDT to paint your garnish. You could just have it repainted black and you redo the pinstriping yourself if your wanting to save some money. Have you bridged the 2 purple wires that are for the neutral switch? There are in a relay that sits up near the battery. Some guys bridge them or even put a switch in there as another security option. Make sure you remove the auto computer under the drivers side dash too. hey mate whats that auto computer under the driver side dash look like, ive had no luck with the one i was thinking of, any help would be awesome cheers.

It sits above the drivers side lower dash cover. It would normally sit up inside there. Has AT2 written on it. If its not there and unplugged that's one thing to cross off the list.