10-09-12, 19:36 GMT+10#1
I need to clear my study up.. I have crap everywhere so random fittings from my desk sale.
Russell VE Braided Brake Lines - Suit Omega, SV6, SS & SSV. Should also fit Redline models with the Brembo. These are ADR ok and will pass any engineering inspection. $150
Contact details in my sig.
AN-6 Check Valve $15
AN-6 40 Micron Filter $15
LS Based Coil - 1 of $15 (From memory it is LS2, came from a crate motor I did some mock up on)
Aeromotive AN-10/AN-6 Multi Port Fuel Log. CNC'd. Perfect for multi carby, nos etc etc. Brand new, cheapest in the world $80
AN-4 90 Deg Black Hose Ends 5 of - $20ea
AN-4 180 Deg Hose End $25
1/8" NPT to AN-4 - $4ea
AN-6 Flare Cap - $5
AN-6 Black Flare Cap - $5ea 2 of
AN-6 Coupler Black - $8
3/8" NPT to AN-6 Black - $5
1/2" NPT to AN-8 Black - $6
AN-8 Coupler Black - $10
AN-6 Black Hose End - $10
AN-6 Coupler - $8
1/2" Pipe to AN-8 Male Flare - $15
AN-6 180 Deg Hose End - $30
1/2" Pipe to Female AN-8 $15 - AN-8 Male Flare Union $6 - AN-8 Coupler $10
AN-6 to AN-8 Expander - $6
LS1 EFI Adapters $10ea
AN-8 Barry Grant Demon Fuel Log - $75
AN-8 ORB 90's (Dry Sump Fittings) These are super bloody expensive, $30ea (IE $90ea)
Random used hose - $ AN-4 90 Deg, AN-4 Straight, 1/8" NPT to AN-4 and 500mm of Hose $30
AN-8 Hose End + 500mm of hose fitted off $25
AN-10 Hose End + 500mm of hose fitted off $35
Russell Speed Bleeders - $10 a pack - 7 of
Check Valve AN-6 Suitable for anything up to 1500psi etc $20ea 3 of
Some original photos have not been recovered yet.
0 likes