09-08-12, 16:37 GMT+10#1
For Sale? Or Wanted? FS
Price/Amount $12000
Open to Swap? Maybe
State VIC
Short Description for title? Tubbed VL Calais Roller
Genuine Turbo Motor? A8? Unsure
Transmission? NONE
Currently Registered? No
REGO/VIN Number? NOHOPE
Contact Info Other than this Forum? via PM or [email removed]
Description Just letting everybody know i will be advertising my Tubbed VL Calais Drag Roller within the next week or 2 as i have no further use for it as the driveline is getting transferred into 1 of my LX SS Torana Hatchback and i have another Car replacing this for both street & strip...
The car will be going on ebay as soon as i send a mate some pic's and he can throw it up for me...( Most likely over the weekend if he can do it )
Car was painted by Albert Rajab, it is still pretty clean in the body and paint for being done over 12yr's ago, BUT it does have the small odd chip and scratch but with a good wash and polish would come up reasonably clean and it's still very very straight...
Car features a tubbed, Ladder Barred 9inch with Strange Billet axles (No Centre), big 5/8 wheel stud's, Koni coil over shock's, braided rear brake line and slotted rotor's etc, it has been done with all top knotch heim's, it can comfortably fit M/T 28x11.5's whilst dumped on it's a$$, currently has 1 meet old Goodyear Eagle 28x10's, Transmission tunnel is setup for a Clutchless Liberty and is removable, Wouldn't be to hard to change it back for a Glide though, the tailshaft tunnel has also been raised the full length so it can be dropped right down, has a full Moly cage with X side intrusion bar's, has 20ltr fuel cell, has stainless washable fuel filter's and twin 044's with a big fuel line, battery in boot etc etc...
VT front brake's (bought from wrecker as i removed my AP 4 spot's, they will need work), Weld Alumastar 15x4 with M/T front runner's, 15x10 rear with 28x10 Goodyear's...
Has no interior AT ALL, no dash, carpet, seat's, still has rooflining etc but from there down it's bare, i do have a folded up alloy dash that can go with the car...
It ain't some immaculate showcar and engine bay could do with a re-do but it is tidy, BUT all the hard yard's have been covered, car goes straight as an arrow and has next to no use, will suit somebody wanting to step out of an un-tubbed big powered car who is looking to go to the next level, just transfer your driveline in an go fast without the headaches of being ****ed around waiting for chassis shop, paint shop's, part's etc...
All work done by Taverna Bros, i'm advertising it for less than what the fabrication work alone cost let alone wheel's, tyre's, body, paint etc etc..
Car will be left un-reserved at $12k so whatever it fetches above that it will be on the market, i may also consider selling less wheel's aswell...
This is EXACTLY how the car look's now in it's present stage, these pic's were takin about 3-4 day's ago...
http://img827.imageshack.us/img827/3189/vl1x.jpg
http://img833.imageshack.us/img833/7889/vl2xq.jpg
Would suit a multitude of engine's, RB, 2J, LS1/2 Turbo etc just fit it in and wire it all up and away you go...
Any question's please feel free to ask, For serious enquiry's or if you need more picture's of certain areas just PM me...
I will have some other part's for sale in coming week's aswell too...
Contact via PM or [email removed]
Steve
0 likes