hi guys just wondering if someone could help me with some advice regarding my vx ss clutch, just wondering is there a way of putting more fluid in it or do i have to change the clutch, if so do i have to change pressure plate and master cylinder also, any idea how much this will set me back, any advice would be most appreciative thanks again guys and gals Some original photos have not been recovered yet.

depends on where the leak is from mate. there is a fluid res next to the brake fluid resevoir see if its empty. if its the master cylinder it will leak into the car down the firewall. if its the slave more likely it will leak into the bellhousing. gearbox out to change the slave prob worth putting a new clutch in while there if its old. fit a remote bleeder also so u can bleed and flush the system a lot easier.

Had to replace the clutch in the Clubby about a year ago. The reason for replacing the clutch was it wasn't disengaging properly. Also there was a bad noise aswell. Here's the cost. (http://imageshack.us/photo/my-images/256/hsvclutch30006.png/) Uploaded with ImageShack.us (http://imageshack.us) Some original photos have not been recovered yet.

cheers guys , thanks for your help . appreciate it