Any one got any tips on removing the pins I've taken all my doors off except front right and get the top pin to move but the bottom one won't move at all sprayed it with worth rust off and tried I have the pin removal tool where u put the threaded pin theought and u have a bar to connect and u smash it with. Hammer
I have just done this I will explain how to use them tools properly
Put your pin tool in so the screw cap is on top for the top door and the bottom for the bottom pin.
Put the suppled wacking stick on the threaded end on the pin (I screwed mine right down) and wack it a few times.. sometimes U need to turn the wacking stick vertical and use the stubby end to get some good force into them..
Once the pin is flat with the door put the U end of the bar onto the othersize of the threaded pin.. We spent ages trying to hit the pins horizontally with no luck.. then we put a 10" pry bar right up near the pin on the bar & hit it vertically.. we did each door in 5 mins with no hickups after this
Quote:
Originally Posted by ITG035
[View Post]
i had same problem using that kind of tool you need to get the slide hammer style tool much easier
Where did u buy this slide one?
---------- Post added 21-04-12 at 10:14 ----------
Quote:
Originally Posted by jbonez
[View Post]
I have just done this I will explain how to use them tools properly
Put your pin tool in so the screw cap is on top for the top door and the bottom for the bottom pin.
Put the suppled wacking stick on the threaded end on the pin (I screwed mine right down) and wack it a few times.. sometimes U need to turn the wacking stick vertical and use the stubby end to get some good force into them..
Once the pin is flat with the door put the U end of the bar onto the othersize of the threaded pin.. We spent ages trying to hit the pins horizontally with no luck.. then we put a 10" pry bar right up near the pin on the bar & hit it vertically.. we did each door in 5 mins with no hickups after this
Yeah it took me like half hour a door I'm doing it by me self, I had no problems with any other door, the
Weird thing is too that the threaded pin u put in fitted all the other pins but this one
Would also like to know this? I brought this one here and broke it straight off the bat!
http://www.ebay.com.au/itm/360439946...#ht_1791wt_952 (http://www.ebay.com.au/itm/360439946484?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_1791wt_952)
i bought mine from a panel beaters shop and worked on two differnt cars. wear thick gloves thou the impact ***ing hurts your hands when holding the rod that you hit
http://www.ebay.com.au/itm/DOOR-HING...em 43af1c88a6 (http://www.ebay.com.au/itm/DOOR-HINGE-PIN-EXTRACTOR-KIT-GM-HOLDEN-EASY-2-USE-NEW-/290700691622?pt=AU_Car_Parts_Accessories&hash=item43af1c88a6)
