hey guys just dropped my efi 5ltr in with a turbo 350 and wanted to know what tranny mount will fit. ive got a turbo 700 one of a vn would that come close any help would be great

if it bolts to the trans ok and it doesnt look to far of mounting to the floor you could always re drill your holes

dunno if its the same but wen i was looking into this for my turbo 400 behind the 304 the trans maount from a ls1 conversion kit on ebay would fit dont know if this helps

well found out the turbo 700 cross member dosnt fit . what else. maybe trimatic x member

Trimatic cross member with a turbo 400 mount which is slimmer than a 700 mount

and does that fit mate ???

What problem did you have with the t700 mount? It may sit back a bit if you can get a Vn v6 cross member and mount out of a car at the wreckers and seperate the two there's a metal plate that you bolt into then bolt that to the mount Hard to explain but it should work So trimatic cross member Then the plate from a Vn Then the t400 mount to that

the turbo 700 mount is ok its the turbo 700 crossmember that dosnt fit it fouls on the rails of the vl . ---------- Post added 15-04-12 at 16:00 ---------- well picked up a trimatic crossmember and its good 2-3 inches from fittings. and my tailshaft dosnt fit either. it looks like its got a short rear housing on the auto. so im struck with what to use to mount the gearbox up