Preserved from CalaisTurbo. Original authors and dates are shown; archived members are not current Holdcom accounts. View original archive ↗
Guys just trying to work out what people have done in regards to throttle cable with there rajab plenums.... I don't want to mount it off the cooler piping incase I blow a cooler pipe off And it pulls the throttle open...
0 likes
ive seen people run a bracket off of the throttlebody, seems to be the way to so it, i also need to mount mine at the moment so some pics would be good.
0 likes
in my case with the rajab plenum the cable was too long, so i just got it shortened so its the perfect length to suit the xf throttlebody factory metal bracket.
cable was shortened by a local motor bike repairer, but im sure theres plenty of other moto shops around that can do it..
0 likes
Yea make bracket of throttle body thats what ive done
0 likes
Quote:
Originally Posted by boosted_wagon
[View Post]
Any one got some pics???
i haven't got any good pics man, all i did was get some 4mm strip and fabricated up the bracket from that
if you can get the hole centres and have the patience to do cardboard templates 100% get it laser cut turns out 100 times better
0 likes
i just used the standard bracket that comes with the throttle body ...
hope this pic helps its the only angle i have of it ...
(http://imageshack.us/photo/my-images/641/20110820185206.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
Some original photos have not been recovered yet.
0 likes
This is how I did mine. Had to obviously shorten the cable but it works a treat
Some original photos have not been recovered yet.
0 likes
thanks guys i should of stated befor the cars on straight gas so im useing a gra t/b
0 likes
