Hey guys, I replaced my power steering pump in my VL due to a leaking pump, after replacing, i bled the system as specified, but after turning the engine over, the rev's are at 1,000 rpm on cold engine, once it begins to warm up it drops to 600 rpm and you can see my oil pressure jump due to the revs, not sure what the problem could be? all i did was replace the pump, and the air con unit had power steering fluid on it so i degreased it and hosed it down, but did not wet any other part of the engine Ive checked all spark plugs etc incase one was loose etc, still not sure what the problem is