Hi guys, i brought this car about 6 mths ago and the motor had a craked head, so i didnt really know what to expect from this motor. it had an upgraded turbo on it but the guy that i brought it off didnt have a clue about it. anyway when i got it i took a punt on the bottom end and spent a few bucks on a new head and cam. put it all together and she runs good, motor sounds healthy even on the limiter.lol Im about to put a lt10s on it so i can get it tuned up but want to know what size turbo, injectors are in it and also what sort of power it should be making. here are some of the specs that i know and have got all the ids off the turbo if someone could let me know what it is. a Stock bottom end (A6) 0.9 Shim Multilayer head gasket (0.6 i think) Cam tech cam (230/230 @112) head slightly shaved Stock N/A plenum (uprading to a forward facing when fitting microtech) FMIC (unknown brand) injectors ( A46-000001 RB20DET) stock exh manifold Turbo (this is what is stamped on the turbo) garret 001775014 Front housing .70 rear housing .82 Full 3 inch manderal exh mx7 with new clutch 3.45 28 spline diff As i said im installing the microtech, plenum, thermo fans aswell as respraying the engine bay and hidding a few wires in the next few weeks. any tips or comments will be appreciated. Cheers simo