i am having troubles starting my vl i have replaced the ecu due to water damage but now it wont start could anyone help with test is could do to find the problem thanks ---------- Post added 08-11-11 at 11:41 ---------- any1 help??? ---------- Post added 08-11-11 at 17:27 ---------- hello i have looked at the codes on the ecu and it hasent got code 11 which is the Cas so would it be the coil or PT if anyone could help with some test i could doi to find what it could be would be helpfulll thanks

change cas with new ones, do an oil & spatk service with a flush added and that should help, i did my cas, starter motor and battery before realising that the main problem was a dirty engine as well...

Check if theres any water under dizzy cap if so get it out. perform spark test on leads. if tester not avaliable diconnect all of your spark plug leads take out 1 spark plug and put it in its lead and place it in the strut tower. so the metals arent touching but close to and turn the car over to see if its getting any spark. It would help if you told us what happens when you try and start it. does it still turn over? does it kick a little?

hello no it dose not start or try to start at all and there is no spark from the coil or spark plugs and no water in the dizzy i was thinking could it be the coil or Power transistor if so how could i test them thanks