Hey guys bout to fit a long rank tank in my vl ,what sender do i have to use with it ,it didnt come with a sender ,will my intank pump work with this tank Any help would be good Cheers Allan

Tried searching? This topic has been covered a thousand times. Your original sender will fit if the flange is the same. (some have 6 bolts, most have 5)

I used my standard sender. Fitted a vq long range fuel tank in my vl.

i noticed on my drop tank there is no return line. how do yoy guys overcome this problem. weld one on ?

Some tanks have the return fitting on the sender unit.

ah ok so my vl one dosnt. could i use one from the droptank and i noticed inside the tank there is a hose would that be the return line

In your first post you said the tank did not come with a sender? :s why wouldn't you just use the one from the tank from the start? If the hose connects to the swirl pot, it is the return line.

sorry mate i got confused with my existing one. long day just finished a 12hr shift lol do you know if the sender to suit the droptank would have the same plugs for the fuel pump and fuel gauge thanks for your help so far

take the thing out and look.....

^****ing oath, do you want it done for you? Have you checked if your long range tank has a short filler neck? If so, be prepared to buy some very expensive 50mm fuel hose.

i don't need the smart ass attitude . never done this sorta stuff before. and yes ive already worked out i need to cut my filler neck off and attach it to the new tank