hey all, i'm very sick of my vl so i decided i'm actually gonna finish it! parts i'm chasing are - * 3" intercooler piping to suit rb25det in vl (with a forward facing plenum and standard lowmount turbo) * Blow off Valve (nothing too loud) * Rising rate fuel pressure regulator * 3" dump pipe to suit rb25det in vl. (or just one to suit a vl) * Brake Upgrades (tell me what you got, anything is better then stock n/a ones) * Surgetank (undercar pref.) to suit single pump * Catch can (with filter ontop) * plus probably more that i can't think of at the moment, but i'm sure i'll add too it. Either Pm me or email with what you got - inferno at calaisturbo.com.au cheers, Shaun

Quote: Originally Posted by inferno [View Post] hey all, i'm very sick of my vl so i decided i'm actually gonna finish it! parts i'm chasing are - * 3" intercooler piping to suit rb25det in vl (with a forward facing plenum and standard lowmount turbo) * Blow off Valve (nothing too loud) * Rising rate fuel pressure regulator * 3" dump pipe to suit rb25det in vl. (or just one to suit a vl) * Brake Upgrades (tell me what you got, anything is better then stock n/a ones) * Surgetank (undercar pref.) to suit single pump * Catch can (with filter ontop) * plus probably more that i can't think of at the moment, but i'm sure i'll add too it. Either Pm me or email with what you got - inferno at calaisturbo.com.au cheers, Shaun i have a rb25det in my vl you dont need a vl dump use the standard rb25det dump just get the front pipe custom made. with the fuel reg you shouldnt need a fuel reg if you use the standard fuel rail and side feed injectors the standard fuel reg is good enough to run 750cc injectors or even more. intercooler piping get it custom made i used a vlt intercooler piping kit with a few mods to it to make it fit but im running the standard inlet. these are just a few things i have learnt during my build and from SAU

yeh i'm not using the standard fuel rail/injectors, got 440cc top feed's and custom rail. if i can get a aftermarket dump i'll try get that first, otherwise yeh i'll prob just use the 25one. i've been looking at getting the piping custom made but i'd take it to them to get it done properly, and just don't have the time to get that done at the moment so hoping for a pre-done, or something close too that i can just modify myself. cheers tho.

yeah i had exactly the same problem with the intercooler piping but unfortunatly there is not a pre made kit. the only thing i can suggest is a vlt kit and modify it to fit

yeahi'll either do that, or i may just for now buy individual pipes from like plazmaman, and make it up that way. but yeah still hoping i can buy most stuff haha Some original photos have not been recovered yet.

if you go seperatly with plazmaman will prob cost you a heap more. i only did mine from a cheap kit for now til i upgrade the turbo

hey buddy i got intercooler polish mandrel bent pipping, feeds off a front facing 26 plenum. ull just need extension on the turbos side cause runs into twins not single, with intercooler, and blow off valve attached 700 vgc custom made have reciept for it, cheers mick [phone removed] can text pics

I got a bov. Turbosmart type 2 if you're keen http://www.calaisturbo.com.au/showthread.php?t=210367