hey guys and gals im just chasins few things for my new set up so if you wanna sell em or know someone who does let us know *6 boost or etm manifold to suit a rb25det and a gt35r * decent wastegate not chinese copies *surge tank *spit fire or yellow jacket coil packs to suit s1 rb25 *fuel rail for a rb25det that will fit 550cc denso injectors i think thats all for now so hit me up if you wanna part with them cheers dan [phone removed] Some original photos have not been recovered yet.

i would hit up sau and ebay for all that gear

+1 on that I have a rb25 in my vl also best place for rb25 stuff is sau are the injectors top feed if so sell them and get get side feeds a whole lot easier due to changing fuel rails on rb25 is not that easy unless you have a forward facing plenum

i got a topfeed but also got a forward facing plenum so ill c how it goes

In that case you should be right for the fuel rail most of boys on sau get them either from eBay or custom made there is also a 6boost manifold for sale on sau in WA section

old mate is right http://www.skylinesaustralia.com/for...-50mm-progate/ (http://www.skylinesaustralia.com/forums/topic/352643-fs-6boost-manifold-50mm-progate/) come on dan - buy it - show us how serious you are haha

sau is a winner

unlike u jack im not afraid to spend money hahaha ---------- Post added 03-02-11 at 10:22 ---------- what kinda prices do 6boost manifold and etm manifold go for new? and what do ppl pref.? i know daveo had a problem with his 6boost one overboosting?

i got a spare surge tank floating around yours for $70 let me know [phone removed]

yer mate im keen cn u pm me with a pic of it?

Quote: Originally Posted by dan89 [View Post] unlike u jack im not afraid to spend money hahaha ---------- Post added 03-02-11 at 10:22 ---------- what kinda prices do 6boost manifold and etm manifold go for new? and what do ppl pref.? i know daveo had a problem with his 6boost one overboosting? get ****ed ****. just because i havnt bin working full time since i was 16 to build a car

BAH. people asking $7-800+ for turbosmart 50mm gates, and about $500-700 for 40(ish)mm gates. Look up Ebay USA, from memory there was a mob in the USA that did turbrosmart 50mm wastegate (delivered to Australia) for <$600....although thing's may have changed since If you're semi interested in updating another bit of the motor, ATI harmonic balancers can be bought direct from ATI (through Ebay again) for about $300-400, which is f*cking cheap - this maybe a worth while investment if you're planning to rev the motor a little more than it would normally, just something to keep in mind I guess (retailers in Australia charge about $600-900 for the same item). here for splitfires, good prices I guess. http://www.nengun.com/splitfire/supe...gnition-system (http://www.nengun.com/splitfire/super-direct-di-ignition-system) note: nengun are notorious for long delivery times, but aren't that bad, some people are just in a rush are are picky. also....you should've got a GT30 Some original photos have not been recovered yet.

i've heard people saying that the 6boost manifold to suit rb25det is really tough to fit into a vl? is that true?

yeah there isnt alot of clearance between the manifold and the strut

Hahaahh I can sort that manifold issue out for u dan

this may not be the case so dont quote me on this but i'm led to believe clearance is only an issue when using a 6boost off a skyline, and if its specified that its for a rb25 in a vl it should fit without too many headaches. and isnt it the chassis rail that is the issue, not the strut? even my low mount had issues with the lip of the chassis rail because of the size of the compressor housing.

6 BOOOSTTTTT FTW =D clearance is close but will fit =D its what BOOOSTN has =P

Yeah I trimed my chassi rail but it's just an excuse to smooth ur chassi rails now hahah

yellow jacket coils comin mondy and bought surge tank.. just looked at 44mm wastgates on ebay goin for round 400 mark !!!