right . . . coming to the end of the build and seen as this is my first vl and first time doing up a car . . oh and i didnt take the engine apart hahah i really need to have a look at someones car for the last bits and peices just to get a personal view on a couple things . . . any help would be good cheers Chris

what do you need to check ? mines far from a factory turbo but may help

I got a mountian of photos of my car and my engine is out if you need close ups of anything

um thermostat housing pipes and a couple stray wires hahaha

the thermostat housing pipes on mine have all changed removed the t pipe and have a single pipe coming out of it now so probably not much help to ya

thanks any way man

allgood man ive done away with the heater on mine so its probably quite different to yours

the heaters out of mine to bro have you made a new peice?

these any good ? Some original photos have not been recovered yet.

yeah man pulled the old t piece out by levering it with a long screwdriver , its just presed in there. then got a single pipe fitting which we tapped the thermostat housing where the old t piece went and screwed in the new singe pipe fitting from memory that goes off to my turbo which depending on if the turbo your running is watercooled or not you might be able to do away with that altogether and just put a blanking plug into the thermostat housing

Quote: Originally Posted by SIKVLT [View Post] these any good ? those are perfect bro and what dose the green fitting . . (that looks like the garden hose) what dose that go to / do Some original photos have not been recovered yet.

thats the knock sensor should have a single wire plug going to it i think its a funny looking green plug that goes to it

**** thanks bro and in photo 1 the two metal pipes one out of the block and one out of a rubber hose are these feed and return lines for the heater

yeah im prety sure they are but not a 100% sure

mate your more than welcome to come view mine,its an N/A converted to turbo,pretty much has all the factory turbo stuff on it though,never know you may get lucky. Im in Manurewa,any time after 5pm is good.im off work tomrw if that helps? 02102486317.

Quote: Originally Posted by NZ-DOSEIT [View Post] mate your more than welcome to come view mine,its an N/A converted to turbo,pretty much has all the factory turbo stuff on it though,never know you may get lucky. Im in Manurewa,any time after 5pm is good.im off work tomrw if that helps? 02102486317. cheers man ill give you a txt tomorrow if thats all good could i come view it around mid day?

yea can do,ill see where im at,got sparky coming at 8am,once hes done ill head back to work,so earlier the better

sweet bro sounds good