Hey guys. I've recently put new headlights in my vl because the old ones were severely filled with water from condensation. Anyway I washed it straight after putting them in today and after cleaning I saw that there was yet again some foggyness building up in one of the lights! the only thing I can think of is that the rubbers that cover the lights may be a bit dodgy? anyone else had this problem? Im thinking of maybe getting some cable ties or something to seal them properly, otherwise Im out of ideas (by the way I suggest getting newies to improve the look of your car, came up a treat!) Cheers in advance! Some original photos have not been recovered yet.

same as mine, mine had new ones put in it before i got it, and they get it some times, i think that little plug on top of the lights??

Quote: Originally Posted by jakemat3 [View Post] same as mine, mine had new ones put in it before i got it, and they get it some times, i think that little plug on top of the lights?? yeah its either that or the one behind it where the cables go. it's gotten slightly worse since I last posted so I'm going to seal them with a cable tie tomorrow. still I'd like to know if theres any other definate way of fixing this problem since it ruins the lights Some original photos have not been recovered yet.

It could also be where the lens seals to the body of the headlight.

take them apart dry them and silcone around the seals

what luxjet said. make sure all of the rubber boots are in place aswell. it also heklps if the car is dry stored (e.g. inside a shed or carport... on the street or under a tree won't help.)

Quick fix is to get a drill and make a small hole in the base of the headlight body

I'll give siliconing it a go, I just hope I don't have to get back into them anytime soon otherwise I'm fu**ed haha. cheers guys!