hey just curious if anyone has the measurements of the banjo bolts on the turbo housing and in the rb30 block, i'm missing the 12mm one for the oil pipe in the block and was gonna make my own...i just dont know how long they are? my mate made a 5/8" banjo bolt and said it was about the right length. any info would be good, incase i get any mates wanting some, then i can just get the bolts and drill them out. cheers.

any ideas?

12mm x 1.25 and 14mm x 1.5 have a better look next time mate Some original photos have not been recovered yet.

Na he wants to know the length (don't worry I was about to post the same thing yesterday then I read his post again ) (sorry I don't know the length of them though) Some original photos have not been recovered yet.

cheers malpaso...though i dont know what im having a better look at? i can get a drain fitting from a mate, but stuffed if i can find somewhere that sells 12x1.25 banjo bolts...thats why i need the length so i can buy normal bolts and drill them into banjo bolts. i'll see how i go.

mate i might have one i will have a look tommorow ---------- Post added 02-08-10 at 22:13 ---------- and if its not it you best bet might be to die one ---------- Post added 02-08-10 at 22:18 ---------- http://cgi.ebay.com.au/Turbo-Oil-Fee...item41517f09db (http://cgi.ebay.com.au/Turbo-Oil-Feed-Line-Nissan-Skyline-RB20DET-RB25DET-RB30-/280540154331?cmd=ViewItem&pt=AU_Car_Parts_Accessories&hash=item41517f09db) http://cgi.ebay.com.au/Turbo-Oil-Fee...item3f01d01c8e (http://cgi.ebay.com.au/Turbo-Oil-Feed-Line-Nissan-RB25-RB30-w-Garrett-T3-T4-/270613355662?cmd=ViewItem&pt=AU_Car_Parts_Accessories&hash=item3f01d01c8e) http://cgi.ebay.com.au/Garrett-T3-T4...item5192dae6f7 (http://cgi.ebay.com.au/Garrett-T3-T4-Turbo-RB30-RB25-RB30-Oil-Feed-Fitting-/350356170487?cmd=ViewItem&pt=AU_Car_Parts_Accessories&hash=item5192dae6f7) ---------- Post added 02-08-10 at 22:25 ---------- ive got these in the shed do any of them look the part. Some original photos have not been recovered yet.

I have them in stock, including washers and banjos for a AN-3 feed. They are $30inc Postage.

How did you go with your fittings champ ??

The M12x1.25mm banjo bolt is 25mm long and the M14x1.5mm banjo bolt is 30mm long..

hey guys, sorry bought a different car so the vl got put on hold for a while haha. just started pulling the vl apart tonight, i made my own 12mm banjo bolt, but it would be longer then 25mm i think, might have to trim it up. hopefully it should be right, i'll probly be taking my time, so i'll make stuff as i go.