im wrecking my VLT, due to buying another car. car is a mock up calais calais front, has working motor, eyelid arms are broken. SOLD calais moulds SOLD calais rear garnish $ 100 VLT 28 spline axles, seen around 20,000km $400 VL 28 spline mini spool in carrier -$100 VLT front slotted rotors with reco VLT calipers, 2x brand new brake hoses $200 ( rotors never been machined) VL rear brakes, consist of brand new PBR calipers, brand new PBR slotted rotors, brand new brake hoses and bendix GCT pads $400, these have seen no more then 1000kms VL turbo conversion parts. -VLT injectors $200 -VL t3 turbo & manifold $300 ( minor shaft play, never had issues in the 4 years it was on) -pacemaker 3inch front pipe $100 -3inch exhaust $100 -600x300x76mm cooler, pipes and joiners with vee port bov $300 -ETM 2L surge tank, suit standard lines $100 -bosch 984 fuel pump suit surge tank $50 ^^ will sell complete for $800 Series 200 interior in great condition, no holes/rips or cig burns $400 Kings springs rear, not sure what height they are, but she sits pretty low. $100 Holden crewman 16" pursuit rims, these are now obsolete and very hard to track down. $400 VY monaro cv8r mags $800, 2 good tyres, all rims 99% good, very few scratches Can SMS photos if required. need to sell asap for holiday money Some original photos have not been recovered yet.

ah mike thats ****! Some original photos have not been recovered yet.

Quote: Originally Posted by mIsS VL [View Post] ah mike thats ****! Nah all is good, over cars ATM, going travelling, but I will have another vl when I get a house and shed Some original photos have not been recovered yet.

Quote: Originally Posted by theVLguy [View Post] Nah all is good, over cars ATM, going travelling, but I will have another vl when I get a house and shed Why buy a later model with an Ls1 in it

Quote: Originally Posted by CLNGMH [View Post] Why buy a later model with an Ls1 in it I didn't, I did have a new ve ss on the line but decided against it.

bump, pm me offers prices in red have been adjusted

what are ur door trims like?

Quote: Originally Posted by 251NFL [View Post] what are ur door trims like? The rears are in GC, the fronts were modified to fit speakers.

nah like what colour are they? lol

like this http://www.calaisturbo.com.au/showth...ght=series+200 (http://www.calaisturbo.com.au/showthread.php?t=47420&highlight=series+200) from trims have the holders removed

would you seperate any of the moulds?

Are you selling the turbo injectors by themselves??? call me on [phone removed] please

3" exhaust $100 Im interested, is this cat back? Do you have a pic you can send me via PM? Can you drop it off to Ormeau?

BUMP prices slashed. i need this **** gone

Did the car have a working oil pressure gauge? If so im after the oil pressuer sender. Small plug next to the oil filter on the block with a blue wire coming out of it

Quote: Originally Posted by FLY-03L [View Post] Did the car have a working oil pressure gauge? If so im after the oil pressuer sender. Small plug next to the oil filter on the block with a blue wire coming out of it car and engine have gone to heaven. only have parts listed above

Quote: Originally Posted by theVLguy [View Post] im wrecking my VLT, due to buying another car. car is a mock up calais calais front, has working motor, eyelid arms are broken. $200 calais moulds $200 calais rear garnish $ 100 VLT 28 spline axles, seen around 20,000km $400 VL 28 spline mini spool in carrier -$100 VLT front slotted rotors with reco VLT calipers, 2x brand new brake hoses $200 ( rotors never been machined) VL rear brakes, consist of brand new PBR calipers, brand new PBR slotted rotors, brand new brake hoses and bendix GCT pads $400, these have seen no more then 1000kms VL turbo conversion parts. -VLT injectors $200 -VL t3 turbo & manifold $300 ( minor shaft play, never had issues in the 4 years it was on) -pacemaker 3inch front pipe $100 -3inch exhaust $100 -600x300x76mm cooler, pipes and joiners with vee port bov $300 -ETM 2L surge tank, suit standard lines $100 -bosch 984 fuel pump suit surge tank $50 ^^ will sell complete for $800 Series 200 interior in great condition, no holes/rips or cig burns $400 Kings springs rear, not sure what height they are, but she sits pretty low. $100 Holden crewman 16" pursuit rims, these are now obsolete and very hard to track down. $400 VY monaro cv8r mags $800, 2 good tyres, all rims 99% good, very few scratches Can SMS photos if required. need to sell asap for holiday money hi there can i have ur mobile number ill buy the lot for 800 Some original photos have not been recovered yet.

Ah **** if only I saw it earlier I needed some parts...

Quote: Originally Posted by Antho [View Post] Ah **** if only I saw it earlier I needed some parts... so i am guessing there aren't any parts left? then

How much for the complete diff